The civil engineering diamond wire can be used on land, can also be used in water. Our construction diamond cutting wire can cut various depths and angles, including complex and irregular shapes. It is sharp and durable.
Product Description:
The diamond wire saw with spring and rubber assembly can be applied on wall openning,roof openning,bridge deck removal or repair,dam modification and repair,culverts and large pipe openning,equipment base removal and modification,silos and chimneys removal,tank modification and openning,tunnel modification,archtectural enhancements.
The diamond wire rope saw is most widely used in removing large sections of reinforced concrete,such as piers,towers,and bridge sections.Areas where low noise levels are required, Diamond cable cutting saw is the ideal solution. Wire saw cutting is also applied in under water cutting, large plinths and beams,during plant shut downs.Wire cutting solution reduces the risk of injury,reduces fatigue and eliminates hand arm vibration syndrome.
Technical Data:
Application | Art No. | Specification (mm) | Beads/M | Reinforcement |
To be widely used for cutting reinforced and highly reinforced concrete | ROC-C110R | ¢11.0×6.5 | 40 | Rubber+Spring |
ROC-C105R | ¢10.5×6.5 | 40 | Rubber+Spring |
Cutting Material | Linear Speed (M/S) | Cutting Speed (M2/H) | Cutting Life (M2/M) |
Reinforced Concrete | 24-26 | 2-3 | 3-5 |
Highly Reinforced Concrete | 20-24 | 1-3 | 2-4 |
Beads Spec. | Out Diameter | Length of work layer (mm) | Bead Length | Manufacture Tech |
¢11.0 | 6.5 | 11 | Sintered |
¢10.5 | 6.5 | 11 | Sintered |

