With multi diamond wire to cut slabs is a technique revolution for block cutting, with great advantages as below: • Multi diamond wire is 10-15 times more effective than traditional gang saw cutting, • Multi wire can cut stones with different hardness. • The power cost is much lower than gang saw. • Wire saw cutting makes lower noise • The water demand for cutting is low, and it can be recycled. Multi wire cut makes small amount of stone powder, and easy to be cleaned and recycled. • The multi wire machines do not ......
Product Description:
The stationary block cutting diamond wire is used mainly for squaring blocks or cutting thick materials. The diamond cable saw is now generally used in cutting granite blocks in workshops. There are many reasons for this:
1. The rubber assembly rope wire allows significantly greater sawing heights than large discs.
2. The diamond cable saw with sintered beads is thinner and more precise than the large disc
3. The investment in a wire saw machine is relatively low.
Technical Data:
Application | Art No | Specification (mm) | Beads/M | Reinforcement |
To be used on multi-wire machines for cutting granite slabs | ROC-MW73P | ¢7.4×7.0 | 37 | Plastic |
ROC-MW80P | ¢8.0×6.0 | 37 | Plastic |
ROC-MW90P | ¢8.0×6.0 | 37 | Plastic |
Cutting Material | Linear Speed (M/S) | Down Speed (CM/H) | Cutting Life (M2/M) |
Soft Granite | 24-30 | 50-80 | 12-14 |
Medium Granite | 22-28 | 40-60 | 10-12 |
Hard Granite | 22-28 | 30-50 | 7-10 |
Abrasive Granite | 24-30 | 50-80 | 10-12 |
Beads Spec. | Out Diameter | Length of work layer (mm) | Bead Length | Manufacture Tech |
¢7.4 | 7.0 | 11 | Sintered |
¢8.0 | 6.0 | 11 | Sintered |
¢9.0 | 6.0 | 11 | Sintered |


Features:
Granite diamond cutting rope saw technology is more and more automated and thus becomes just as productive as competing techniques.
Noise nuisance generated by granite block wire saw cutting is significantly less than that produced by other sawing techniques.
More Detail
Diamond Wire for Granite Block Cutting.pdf