Spring Diamond Wire mainly used for marble quarry which can vastly improve the exploiting efficiency and reduce the waste of quarry resource. It is safety when operation & benefit in environmental protection.
Product Description:
Diamond wire with spring reinforced is mainly used for marble quarry which can vastly improve the exploiting efficiency and reduce the waste of quarry resource. It is safety when operation & benefit in environmental protection.
To be able to used for great area marble quarries cutting;
To greatly increase the recovery rate of marble quarry;
High manufacture efficiency;
Safety, low-noise, no-dust and friendly surroundings;
Low cutting cost, with easy assembly and repairment
Technical Data:
DIAMOND WIRE FOR WET CUTTING OF MARBLE/TRAVERTINE AND LIMESTONE:
| Application | Art No. | Specification (mm) | Beads/M | Reinforcement |
| To be widely used for WET cutting of marble/travertine and limestone in quarries | ROC-MQ115S | ¢11.5×6.5/6.0 | 26/28 | Spring |
| ROC-MQ115R | ¢11.5×6.5/6.0 | 37 | Rubber |
| ROC-MQ110S | ¢11.0×6.5/6.0 | 26/28 | Spring |
| ROC-MQ110R | ¢11.0×6.5/6.0 | 37 | Rubber |
| ROC-MQ105S | ¢10.5×6.5/6.0 | 26/28 | Spring |
| ROC-MQ105R | ¢10.5×6.5/6.0 | 37 | Rubber |
| Cutting Material | Linear Speed (M/S) | Cutting Speed (M2/H) | Cutting Life (M2/M) |
| Soft | 35-45 | 15-20 | 80-100 |
| Medium | 35-40 | 8-16 | 60-80 |
| Hard | 30-35 | 6-10 | 50-70 |
| Beads Spec | Out Diameter | Length of work layer (mm) | Bead Length | Manufacture Tech |
| ¢11.5 | 6.5/6.0 | 11 | Sintered |
| ¢11.0 | 6.5/6.0 | 11 | Sintered |
| ¢10.5 | 6.5/6.0 | 11 | Sintered |
DIAMOND WIRE FOR DRY CUTTING OF MARBLE/TRAVERTINE AND LIMESTONE:
| Application | Art No | Specification (mm) | Beads/M | Reinforcement |
| To be widely used for DRY cutting of marble/travertine and limestone in quarries | ROC-MQ115D | ¢11.5×6.0 | 26/28 | Spring |
| ROC-MQ110D | ¢11.0×6.0 | 26/28 | Spring |
| ROC-MQ105D | ¢10.5×6.0 | 26/28 | Spring |
| Cutting Material | Linear Speed (M/S) | Cutting Speed (M2/H) | Cutting Life (M2/M) |
| Soft | 35-45 | 9-14 | 70-90 |
| Medium | 35-40 | 7-12 | 50-70 |
| Hard | 30-35 | 5-9 | 40-60 |
| Beads Spec | Out Diameter | Length of work layer (mm) | Bead Length | Manufacture Tech |
| ¢11.5 | 6.0 | 11 | Sintered |
| ¢11.0 | 6.0 | 11 | Sintered |
| ¢10.5 | 6.0 | 11 | Sintered |

