This innovative technique of wire cutting starts in quarries to extract the blocks and has been widely introduced to cut the reinforced concrete for Rehabilitation or Demolition of Dam, Bridges,Highway,Sport Stadiums,Power Stations,Paper Factory,Steel Factory and Cutting doorways.
Product Description:
The diamond wire rope saw is most widely used in removing large sections of reinforced concrete,such as piers,towers,and bridge sections. Areas where low noise levels are required, Diamond cable cutting saw is the ideal solution. Wire saw cutting is also applied in under water cutting, large plinths and beams,during plant shut downs.Wire cutting solution reduces the risk of injury,reduces fatigue and eliminates hand arm vibration syndrome. Diamond Wire Sawing is also available to reach the narrow area for cutting over the part, where other saws is impossible to position in.
Technical Data:
Application | Art No. | Specification (mm) | Beads/M | Reinforcement |
To be widely used for cutting reinforced and highly reinforced concrete | ROC-C110R | ¢11.0×6.5 | 40 | Rubber+Spring |
ROC-C105R | ¢10.5×6.5 | 40 | Rubber+Spring |
Cutting Material | Linear Speed (M/S) | Cutting Speed (M2/H) | Cutting Life (M2/M) |
Reinforced Concrete | 24-26 | 2-3 | 3-5 |
Highly Reinforced Concrete | 20-24 | 1-3 | 2-4 |
Beads Spec. | Out Diameter | Length of work layer (mm) | Bead Length | Manufacture Tech |
¢11.0 | 6.5 | 11 | Sintered |
¢10.5 | 6.5 | 11 | Sintered |
Why use KEENTEC? The answer is simple - we've been there and done that. Don't reinvent the wheel. Spend your time and money wisely to apply the experience and knowledge of others and position you and your company out in front of the competition.

More Detail
Diamond Wire for Reinforced Concrete.pdf