Spring Diamond Wire Saw mainly used for marble quarry which can vastly improve the exploiting efficiency and reduce the waste of quarry resource. It is safety when operation & benefit in environmental protection.
Product Description:
The travertine quarry cutting spring diamond wire saw developing by KEENTOOL with features of:
Keentool studies the travertine material to be extracted to design the best bond, number of beads per meter;
Keentool wire use the top quality steel cable from Germany
Keentool use the durability spare parts to make sure the life time of wire
Keentool specially developed the bond with super quality diamond of beads for dry cutting of marble/limestone and travertine with no water.
Technical Data:
PARAMETERS OF SPRING DIAMOND WIRE SAW FOR WET CUTTING OF TRAVERTINE:
| Application | Art No. | Specification (mm) | Beads/M | Reinforcement |
| To be widely used for WET cutting of marble/travertine and limestone in quarries | ROC-MQ115S | ¢11.5×6.5/6.0 | 26/28 | Spring |
| ROC-MQ115R | ¢11.5×6.5/6.0 | 37 | Rubber |
| ROC-MQ110S | ¢11.0×6.5/6.0 | 26/28 | Spring |
| ROC-MQ110R | ¢11.0×6.5/6.0 | 37 | Rubber |
| ROC-MQ105S | ¢10.5×6.5/6.0 | 26/28 | Spring |
| ROC-MQ105R | ¢10.5×6.5/6.0 | 37 | Rubber |
| Cutting Material | Linear Speed (M/S) | Cutting Speed (M2/H) | Cutting Life (M2/M) |
| Soft | 35-45 | 15-20 | 80-100 |
| Medium | 35-40 | 8-16 | 60-80 |
| Hard | 30-35 | 6-10 | 50-70 |
| Beads Spec | Out Diameter | Length of work layer (mm) | Bead Length | Manufacture Tech |
| ¢11.5 | 6.5/6.0 | 11 | Sintered |
| ¢11.0 | 6.5/6.0 | 11 | Sintered |
| ¢10.5 | 6.5/6.0 | 11 | Sintered |
PARAMETERS OF SPRING DIAMODN WIRE SAW FOR DRY CUTTING OF TRAVERTINE:
| Application | Art No | Specification (mm) | Beads/M | Reinforcement |
| To be widely used for DRY cutting of marble/travertine and limestone in quarries | ROC-MQ115D | ¢11.5×6.0 | 26/28 | Spring |
| ROC-MQ110D | ¢11.0×6.0 | 26/28 | Spring |
| ROC-MQ105D | ¢10.5×6.0 | 26/28 | Spring |
| Cutting Material | Linear Speed (M/S) | Cutting Speed (M2/H) | Cutting Life (M2/M) |
| Soft | 35-45 | 9-14 | 70-90 |
| Medium | 35-40 | 7-12 | 50-70 |
| Hard | 30-35 | 5-9 | 40-60 |
| Beads Spec | Out Diameter | Length of work layer (mm) | Bead Length | Manufacture Tech |
| ¢11.5 | 6.0 | 11 | Sintered |
| ¢11.0 | 6.0 | 11 | Sintered |
| ¢10.5 | 6.0 | 11 | Sintered |

