The plastic reinforced diamond wire has been widely introduced for profiling of marble/travertine and limestone, with advantages as below: • To cut special shape in short time; • Smooth cutting • Low power consumption and less raw material waste; • Low noise and Less pollution; • Easy manipulation and with low cost.
Product Description:
Keentool profiling diamond wire is specifically designed for making special profiles: concave and convex cuts.
The use of profiling rope saw makes possible the optimum use of excellent quality materials that are discarded from the production of slabs and paving stones.
The plastic injection wires saw is essentially composed of three main components:
1.Germany steel cable with different diameter depending on the application.
2.Sintered diamond beads.
Bond and diamond studied for the material to cut.
3.Assembly with plastic.
Protects the steel cable from the abrasive action of the stone and also absorbs the energy of the cutting friction of the beads against the stone.
Technical Data:
Application | Art No. | Specification (mm) | Beads/M | Reinforcement |
To be widely used for cutting marble/travertine/ limestone slabs, and Profiling etc | ROC-MP85P | ¢8.5×6.0 | 37 | Plastic |
ROC-MP90P | ¢9.0×6.0 | 37 | Plastic |
Cutting Material | Linear Speed (M/S) | Down Speed (CM/H) | Cutting Life (M2/M) |
Soft | 30-40 | 120-200 | 50-85 |
Medium | 30-40 | 100-160 | 40-70 |
Hard | 30-40 | 80-120 | 30-50 |
Beads Spec. | Out Diameter | Length of work layer (mm) | Bead Length | Manufacture Tech |
¢8.5 | 6.0 | 9.5 | Sintered |
¢9.0 | 6.0 | 9.5 | Sintered |
Features:
Keentool studies the granite to be cut to design the bond and number of beads per meter;
Keentool diamond wire saw use the top quality steel cable from Germany
KEENTOOL wires use the Bayer or BASF plastic grains from Germany, and the most advanced plastic injection equipment and system to make sure profiling shaping diamond wire can work with stable performance till the end

More Detail
Diamond Wire for Granite Profiling.pdf