Product description
·Specifications:Bandwidth (mm)Cloth layerCover thickness (mm)FaceNon working face4003~44 5 3 03 0 1 55003~54 5 3 03 0 1
Product specifications

·Specifications:
| Bandwidth (mm) | Cloth layer | Cover thickness (mm) |
| Face | Non working face |
| 400 | 3~4 | 4.5 3.0 | 3.0 1.5 |
| 500 | 3~5 | 4.5 3.0 | 3.0 1.5 |
| 600 | 3~5 | 6.0 4.5 | 3.0 1.5 |
| 650 | 3~5 | 6.0 4.5 3.0 | 3.0 1.5 |
| 800 | 3~6 | 6.0 4.5 3.0 | 4.5 3.0 1.5 |
| 1000 | 3~7 | 6.0 4.5 3.0 | 4.5 3.0 1.5 |
| 1200 | 4~7 | 6.0 4.5 | 4.5 3.0 1.5 |
| 1400 | 4~7 | 6.0 4.5 | 4.5 3.0 |
| 1600 | 4~7 | 6.0 4.5 | 4.5 3.0 |
| 1800 | 5~7 | 6.0 4.5 | 4.5 3.0 |
| 2000 | 5~7 | 6.0 4.5 | 4.5 3.0 |
| 2200 | 5~7 | 6.0 4.5 | 4.5 3.0 |
·Technical indicators: ordinary use of polyester conveyor belt in accordance with the requirements of the GB/T7984-2001 standard
·1, the physical mechanical properties of the compound cover:
| Overlay performance level | The tensile strength is not less than | Elongation at break =% | The wear volume is less than or equal to mm3 | 70 c * 168h after aging, the tensile strength and elongation at break change% |
| MPa |
| Strongly zoned type | 24.0 | 450 | 120 | -25~+25 |
| Strong wear type | 18.0 | 400 | 100 | -25~+25 |
| General type | 15.0 | 350 | 200 | -25~+25 |
·2, the bonding strength between layers:
| Index item | Inter layer | Covering layer and layer |
| The cover layer thickness is less than 1.5mm | Thickness of covering layer > 1.5mm |
| N/mm | N/mm | N/mm |
| The average value of the longitudinal sample is not less than | 4.50 | 3.2 | 3.5 |
| The average value of the transverse sample is not less than | 4.50 | 3.2 | 3.5 |
| The highest peak value of all samples is not more than | 20 | 20 | 20 |
| The minimum peak value of all samples is not less than | 3.9 | 2.4 | 2.9 |
Difficult to burn in compliance with the requirements of the GB/10822-89 standard
| ·1. The physical properties of the covering layer: |
| The tensile strength of the composite cover layer is not less than MPa | 10 |
| The cover layer is not less than the elongation% | 350 |
Physical performance requirements of the general refractory zone with no cover layer thickness less than 2.0mm
·2, the bonding strength between layers: |
| Index item | Inter layer | Covering layer and layer |
| The cover layer thickness is less than 1.5mm | Thickness of covering layer > 1.5mm |
| N/mm | N/mm | N/mm |
| The average value of the longitudinal sample is not less than | 5.0 | 3.5 | 3.9 |
| The minimum peak value of all samples is not less than | 3.9 | 2.4 | 2.9 |
| Difficult combustion performanceJ | Difficult combustion and static electricity performance K |
| Three (longitudinal) full thickness specimen flame duration average less than 60s and any a single results were no recrudescence phenomenon | The performance of the flame retardant is not more than 3 * 108Ω on the surface resistance of J. |
Acid alkali resistance with enterprise standards in accordance with the requirements of QBYC2003-01>
·1, the physical properties of compound cover:
|
| Index name | Company | index |
| The tensile strength is not less than | MPa | 10 |
| The elongation of not less than | % | 350 |
| 72 c * 70h after aging, tensile strength change rate% | % | ±30 |
| The elongation rate of change | % | ±30 |
| Wear quantity is not more than | Cm 3/1.61km | 1.0 |
| Change rate of tensile strength of H 2 SO 440% | % | -15~+15 |
| Room temperature 48h elongation rate | % | -15~+15 |
| Change ratio of tensile strength of NaOH 40% | % | -15~+15 |
| Room temperature 48h elongation rate | % | -15~+15 |
| Index name | Inter layer | Covering layer and layer |
| The cover layer thickness is less than 1.5mm | Thickness of covering layer > 1.5mm |
| The average value of the longitudinal sample is not less than | 3.15 | 2.10 | 2.70 |
| The average value of the transverse sample is not less than | 3.15 | 2.10 | 2.70 |
| The highest peak value of all samples is not more than | 20.0 | 20.0 | 20.0 |
| The average value of all samples is not less than | 3.50 | 2.40 | 3.0 |
| The minimum peak value of all samples is not less than | 2.70 | 1.60 | 2.20 |