Fire-resistant Conveyor Belt
Product description
Technical specifications and test datanumberInspection itemsUnit of measurementStandard requirementsdetection result1Appe
Product specifications

Technical specifications and test data |
| number | Inspection items | Unit of measurement | Standard requirements | detection result |
1 | Appearance quality | / | / | qualified |
2 | Width deviation | mm | ±10 | -2 |
3 | Thickness deviation of upper covering layer | mm | Not less than6.65 | 7.00 |
4 | Thickness deviation of the lower cover | mm | Not less than2.80 | 3.10 |
5 | Longitudinal full thickness tensile strength | N/mm | Not less than450 | 465 |
6 | Transverse full thickness tensile strength | N/mm | Not less than100 | 145 |
7 | Full thickness longitudinal reference force elongation | % | Not less than1.0 | 0.7 |
8 | Full thickness longitudinal elongation | % | Not less than3.0 | 3.7 |
9 | Covering a burning resistant experimental high temperature burning depth | mm | Not less than0.5 | 0.3 |
10 | Ten high temperature burning depth | mm | Not less than0.1 | -0.4 |
11 | Minimum tensile strength of 125 c * 168h after hot air aging | mpa | 5 | 12 |
12 | Decrease in tensile strength | % | 40 | 25 |
13 | The lowest value of elongation at break | % | 180 | 450 |
14 | The elongation rate decreased | % | 55 | 34 |
15 | Average value of adhesion strength between layers at normal temperature and under normal temperature | N/mm | Not less than6.0 | 18.6 |
16 | Minimum vertical distribution | N/mm | 4.0 | 18.0 |
17 | Coverage layer < 3mm: the longitudinal mean value of the covering layer and the cloth layer | N/mm | Not less than6.0 | 16.8 |
18 | Longitudinal minimum value between the covering layer and the cloth layer | N/mm | 4.0 | 16.4 |
19 | Covering layer > 3mm: the longitudinal mean value of the covering layer and the cloth layer | | | |
20 | Longitudinal minimum value between the covering layer and the cloth layer | N/mm | 4.0 | 16.8 |
21 | High temperature 160 | N/mm | Not less than3.0 | 6.2 |
22 | Minimum vertical distribution | N/mm | 2.0 | 4.3 |
23 | Coverage layer < 3mm: the longitudinal mean value of the covering layer and the cloth layer | N/mm | Not less than3.0 | 4.8 |
24 | Longitudinal minimum value between the covering layer and the cloth layer | N/mm | 2.0 | 4.4 |
25 | Covering layer > 3mm: the longitudinal mean value of the covering layer and the cloth layer | N/mm | Not less than3.0 | 5.6 |
26 | Longitudinal minimum value between the covering layer and the cloth layer | N/mm | 2.0 | 5.1 |