Welcome Customer !

Membership

Anhui Zhimin Electrical Technology Co., Ltd.
Free Member ·1YRS
BangBu,AnHui
Manufacturer

Main Products: Load Cell|Indicator|Pressure Sensor

Xwboo>Products

Anhui Zhimin Electrical Technology Co., Ltd.Free·1YRS

  • E-mail

    info@zhiminsensor.com

  • Phone

  • Address

    No.712 Lao Shan Road, Bengbu, Anhui Province, China

Contact Now

Weighing indicator RS485 interface

Model
Nature of the Manufacturer
Manufacturer
Product Category
Place of Origin
City, Province
Overview
The display uses a 24 bit A / D converter, can be connected to various types of sensors and transmitters to achieve the pressure, flow, level composition analysis and volume measurements, and other physical and mechanical parameters, display, alarm monitoring, data acquisition and recording.Functions:Relay(1,2,3)Amplifer 4-20mA, 0-5VRS485 interface6 digit LED displayBaud rate 38400Applications:Load cellsWeight sensors
Product Details
Technical specifications:
1. Analog inputs
Analog input uses 20 bit AD chip, sampling rate 50 times / sec,
the accuracy of 0.1%
Display range -9999~19999
The maximum number of divisions 50000
Supply voltage 10V, 100mA
2. Switch output
3 relay or OC output. Relay contact 250V/1A OC, optional AC output driver 100mA/48V.
3. Transmitting Output
Output 4-20mA, 12bit precision, driving 500 ohm load. Optional function.
4. Communication port
485 port, can perform modbus RTU and active upload protocol. This function is optional.
5. Simple comparison output
Function Description: the 3 output of the indicator can be set to be greater than or less than the comparison.
When the measurement value is greater than the upper limit, the output is valid, and the output is invalid
when the measurement value is less than the upper limit. When the output is set to be less than the
comparison, the output is effective when the measurement value is less than the lower limit, and when the

measurement value is higher than the lower bound, the output is invalid. See diagram for details.


Dimensions in mm