Static non-rotating torque sensor 200nm

NegotiableUpdate on September 08

Model

Nature of the Manufacturer: Manufacturer

Product Category

Place of Origin: City, Province

Online Consult Contact Information

Overview

The ZMNJ is a non-rotating type torque transducer that converts a torsional mechanical input into an electrical output signal. The ZMNJ can be used in both clockwise and counterclockwise direction ranging from 1Nm up to 200Nm. The sensor is used in static and non-rotating torsion measure applications. Features: Capacity 1Nm-200Nm Static torsion measure Rational outputs Nickel plated alloy steel Optional features: Hermetically sealed available

Product Details

1. The sensor is used in static and non-rotating torsion measure applications.

2. The ZMNJ is a non-rotating type torque transducer that converts a torsional mechanical input into an electrical output signal.

3. The ZMNJ can be used in both clockwise and counterclockwise direction ranging from 1Nm up to 200Nm.

Dimensions in mm

PARAMETER	VALUE	UNIT
Standard capacities (Emax)	1-200	Nm
Rated output-R.O.	1.0	mV/V
Zero balance	1	±% of rated output
Non linearity	0.2	±% of rated output
Hysteresis	0.2	±% of rated output
Non-repeatability	0.1	±% of rated output
Creep error (30 minutes)	0.03	±% of rated output
Zero return (30 minutes)	0.03	±% of rated output
Temperature effect on min. dead load output	0.0026	±% of rated output/℃
Temperature effect on sensitivity	0.0015	±% of rated output/℃
Compensated temperature range	-10 to +40	℃
Operating temperature range	-20 to +60	℃
Safe overload	150	% of R.C
Ultimate overload	200	% of R.C
Excitation, recommended	10	Vdc
Excitation, maximum	15	Vdc
Input resistance	710±10	Ohms
Output resistance	700±3	Ohms
Insulation resistance	5000	Mega-Ohms
Material	Alloy steel
Protection class	IP66