Dual flange torque transducer

NegotiableUpdate on September 08

Model

Nature of the Manufacturer: Manufacturer

Product Category

Place of Origin: City, Province

Online Consult Contact Information

Overview

Flange to flange torque sensor ZMFNJ is a non-rotating type torque transducer that converts a torsional mechanical input into an electrical output signal. ZMFNJ can be used in both clockwise and counterclockwise direction ranging from 5Nm up to 10000Nm. The measuring range and dual flange size can be customized to meet customer’s requirements. Features: Capacity 5Nm-10000Nm Static torsion measure Rational outputs Nickel plated alloy steel Optional features Hermetically sealed available

Product Details

1. Flange to flange torque sensor ZMFNJ is a non-rotating type torque transducer that converts a torsional mechanical input into an electrical output signal.

2. ZMFNJ can be used in both clockwise and counterclockwise direction ranging from 5Nm up to 10000Nm.

3. The measuring range and dual flange size can be customized to meet customer’s requirements.

Dimensions in mm

PARAMETER	VALUE	UNIT
Standard capacities (Emax)	5-10000	Nm
Rated output-R.O.	2.0	mV/V
Zero balance	1	±% of rated output
Non linearity	0.2	±% of rated output
Hysteresis	0.1	±% of rated output
Non-repeatability	0.05	±% of rated output
Creep error (30 minutes)	0.03	±% of rated output
Zero return (30 minutes)	0.03	±% of rated output
Temperature effect on min. dead load output	0.0026	±% of rated output/℃
Temperature effect on sensitivity	0.0015	±% of rated output/℃
Compensated temperature range	-10 to +40	℃
Operating temperature range	-20 to +60	℃
Safe overload	150	% of R.C
Ultimate overload	200	% of R.C
Excitation, recommended	10	Vdc
Excitation, maximum	15	Vdc
Input resistance	380±10	Ohms
Output resistance	350±3	Ohms
Insulation resistance	5000	Mega-Ohms
Material	Alloy steel
Protection class	IP66