Flat compression washer type donut load cell

NegotiableUpdate on September 08

Model

Nature of the Manufacturer: Manufacturer

Product Category: Miniature force sensor

Place of Origin: City, Province

Online Consult Contact Information

Overview

The ZMMC3 is through-hole force sensor which is available in a wide range of standard capacities from 50N through to 1000N. Zhimin offers custom solutions which help you design your unique load cell application. For wahser type load cell, we need to know your required diameter and through hole size. In order to reduce your cost, zhimin can produce sensors according to your current products. Our aim is to provide best solutions for your precious clients. Features: Capacity 50N-1KN Low profile and compact size ......

Product Details

The ZMMC3 is through-hole force sensor which is available in a wide range of standard capacities from 50N through to 1000N. The ZMMC3 is configured for compression force measurement acting on cylinders, bolts or shafts. A range of internal through-hole diameters is available. The outer and inner diameter can be customized based on client's requirements.

Dimensions in mm

PARAMETER	VALUE	UNIT
Standard capacities (Emax)	50-1000	N
Rated output-R.O.	1.5	mV/V
Zero balance	1	±% of rated output
Non linearity	0.25	±% of rated output
Hysteresis	0.25	±% of rated output
Non-repeatability	0.1	±% of rated output
Creep error (30 minutes)	0.05	±% of rated output
Zero return (30 minutes)	0.05	±% of rated output
Temperature effect on min. dead load output	0.0026	±% of rated output/℃
Temperature effect on sensitivity	0.0015	±% of rated output/℃
Compensated temperature range	-10 to +40	℃
Operating temperature range	-20 to +60	℃
Safe overload	150	% of R.C
Ultimate overload	200	% of R.C
Excitation, recommended	10	Vdc
Excitation, maximum	15	Vdc
Input resistance	720±20	Ohms
Output resistance	700±3	Ohms
Insulation resistance	5000	Mega-Ohms
Material	Stainless steel
Protection class	IP66