-
E-mail
export@wedhb.com
- Phone
-
Address
Changjie North Road, Chagnsha City, Hunan Province, China
Membership
Help
Welldone Environmental Protection Equipment (Changsha) Co., Ltd.Free·1YRS
export@wedhb.com
Changjie North Road, Chagnsha City, Hunan Province, China
Welding fume extration hood is widely used in welding, cutting, grinding,polishing, etc.
Working principle: produce air flow at the the welding point, catch the fume to the dust collector.
The design of Welding fume extration hood
● The suction hood should close to the welding point as near as possible without effect working.
● Add more flange if possible at the four side.
● Can add movable arch board if suction fume on the top side.
● When the suction area too big, can separate it to several small parts.
● Deign air flow distribute board if possible
For middle amount fume filtration

Welding fume extration hood machine model for choose (have air volume 1500~36000 different model for choose)
Mode | WLC-9YT |
Voltage/Phase/frequency | 380V/3PH/50HZ |
Air volume | 9000m³/h |
Engine power | 11kw |
Filter efficiency | 99.99% |
Filter | 9-Φ324*860mm |
Anti-blow valve quantity | 9 |
Ash bucket capacity | 60L |
dB | <75db |
Compressed air requirement | 0.5-0.6MPa |
Outside demension | 1450*1450*2720mm |
Air intake demension | Φ450mm |
Option | Anti-explosion |
Option | Frequency conversion |
Option | Wireless remote control |
Option | Activated carbon filtration |
The characteristic of the filter cartridge of the dust collector?
The installation of the filter cartridge of the dust collector is vertical mounted. Using polyester coated filter material, the material of the filter cartridge is hard. The filter area of one filter cartridge is 15m2, when the filter material form into the filter cartridge, the smaller quantity of the pleat, the bigger angle between the pleat and pleat. In the process of the anti-blowing dust removing, we use the vertical mounted, which make the ash drop down by themselves, and the long service life of the filter cartridge.