Welcome Customer !

Membership

Welldone Environmental Protection Equipment (Changsha) Co., Ltd.
Free Member ·1YRS
ChangSha,HuNan
Manufacturer

Main Products: Dust Collector|Cartridge Dust Collector

Xwboo>Products

Welding Fume Filter System

Model
Nature of the Manufacturer
Manufacturer
Product Category
Laser Fume Filter
Place of Origin
City, Province
Overview
Welding dust can cause health problems such as pneumoconiosis, and it can also cause serious damage to product quality and production equipment. In addition, welding soot will also reduce productivity, resulting in reduced capacity and ultimately lower profits. A good safe working environment is a key factor in ensuring strong business requirements.
Product Details

1. Handcraft welding fume dust treatment

Welding dust can cause health problems such as pneumoconiosis, and it can also cause serious damage to product quality and production equipment. In addition, welding soot will also reduce productivity, resulting in reduced capacity and ultimately lower profits. A good safe working environment is a key factor in ensuring strong business requirements.

Welldone can effectively improve the workplace environment, protect workers' health and equipment, reduce production interference and improve profits.

Positive effect: reduce employee occupational disease. save staff expenses, promote teamwork, attract new employee, increase productivity, improve the quality of the product, enhance the competitiveness of businesses. reduced cleaning costs for equipment and machinery,  improve corporate image.

Our solution includes local governance and overall governance, eliminating the welding dust produced in the workshop.


Multi-function purifying table---it is suitable for small workpiece welding, the welding position is relatively fixed.

image001.jpg


smoke purifier—it is suitable for small workpiece welding, the welding position is more flexible and scattered.

smoke purifier is a cost-effective solution which is designed for the smoke extration. It is a kind of portable welding fume exhaust purifying device which can assemble one or two rotating suction arm at any angle. As long as the power is connected, the welding can be started.

Model

WYJ-1.5Z

Max. Airfolw

1500m³/h

Filter Cleaning Method

Pulse jet/Automatic

Power Supply

380V/3PH/50HZ

Motor Power

1.5kw

Filtering Efficiency

99.9%

Filter Elements

1-Φ324*610mm

Extraction Arm

1-Φ160mm

The length is optional for 2 or 3 or 4m.

Dustbin Volume

28L

Noise Level

≦75dB(A)

Compressed Air Requirement

0.4-0.5MPa

Location

Indoor

Dimensions

865*665*1260mm

Options

Combined Switch Control

Activated carbon filtration


2. Welding workshop treatment

Working principle:

The suction dedusting system is a pipe with multiple vents and suction vents, one or two sets of fans and filters. The pipe is usually installed in 4-6 m (welding fume suspended layer) height of the workshop. By blowing in the air, the welding area is surrounded by pipes, which not only can control the distribution of the individual equipment, but also can effectively control the pests in the whole workshop,inject a certain amount of energy into the space, a multi-strand parallel jet that is consistent in its direction, the movement of the jet in this area approximates the plane motion, form a horizontal air barrier. A gas is blown out at one end of the pipe and a gas is inhaled at the opposite end, the polluted air enters the system and the filtered air goes back to the workshop, it is a continuous process to drain clean air and recycle clean air. This creates constant air circulation throughout the area, and the welding smoke is continuously collected and to meet environmental standards.


Other working condition or air volume need, we accept customization

image003


Mode

WLC-16FTS

Voltage/Phase/frequency

380V/3PH/50HZ

Air volume

20000m³/h

Filter efficiency

99.99%

Filter quantity

16 pcs

Anti-blow valve quantity

16 pcs

Ash bucket capacity

40L

dB

<85db

Compressed air requirement

0.5-0.6MPa

Outside demension

1980*1790*2921mm

Air intake demension

Φ350mm

Option

Anti-explosion

Option

Frequency conversion

 

3. Why choose Welldone Industrial air filtration system: 

1). 4000~36000m3/h air volume different model for choose.

2). Japan import PTFE layer 8000h lifetime filter cartridge, 99.99%—0.1micron filter efficiency

3). PLC control easy operate

4). 3 years warranty on fan and motor/1years warranty on filter

5). CE, ISO9001, ISO14001, and OHSAS18001 approved.

Famous brand components, like Siemens main motor, Mitsubishi PLC and frequency conversion, Schneider switch and plug.


FAQ

Q: Do you have after-sale service?

A: yes, we have perfect after-sale service for the products' all life.

Q: Where is your factory?

A: We are in ChangSha City, Hunan province,China.

Q: Are you a manufacturer or a trading company

A: We are manufacturer.

Q: Do you give any discount ?

A: I'll surely try my best to help you get those by the best price and good service at the same time.

Q: How long is the warranty?

A: The warranty is one year (except wearing spare parts )


Hot Tags: welding fume filter system, China, suppliers, manufacturers, factory, price
Similar Product Recommend