Welcome Customer !

Membership

Welldone Environmental Protection Equipment (Changsha) Co., Ltd.
Free Member ·1YRS
ChangSha,HuNan
Manufacturer

Main Products: Dust Collector|Cartridge Dust Collector

Xwboo>Products

Industrial Dust Extraction System

Model
Nature of the Manufacturer
Manufacturer
Product Category
Welding Fume Extractor
Place of Origin
City, Province
Overview
Welding fume, polishing dust, oil mist: The metal industry produces all kinds of pollution. Welder and staff in the workplace will contact with the air pollution, in order to establish a healthy and safe working conditions, it must reduce the risks, taking protective measures is an important aspect, in fact, its importance has made the establishment of a strict standard to regulate in the world.
Product Details

Welldone industrial dust extraction system for whole factory fume filtration:

Why fume exhaust is important?

Welding fume, polishing dust, oil mist: The metal industry produces all kinds of pollution. Welder and staff in the workplace will contact with the air pollution, in order to establish a healthy and safe working conditions, it must reduce the risks, taking protective measures is an important aspect, in fact, its importance has made the establishment of a strict standard to regulate in the world. Welding smoke and dust, tiny particles and melting metal residues must be professionally filter processing to ensure that workers have a better feeling and a better performance, which will lead to higher job performance and less absenteeism due to illness. Prevention of occupational disease.


Working principle:

The suction dedusting system is a pipe with multiple vents and suction vents, one or two sets of fans and filters. The pipe is usually installed in 4-6 m (welding fume suspended layer) height of the workshop. By blowing in the air, the welding area is surrounded by pipes, which not only can control the distribution of the individual equipment, but also can effectively control the pests in the whole workshop, inject a certain amount of energy into the space, a multi-strand parallel jet that is consistent in its direction, the movement of the jet in this area approximates the plane motion, form a horizontal air barrier. A gas is blown out at one end of the pipe and a gas is inhaled at the opposite end, the polluted air enters the system and the filtered air goes back to the workshop, it is a continuous process to drain clean air and recycle clean air. This creates constant air circulation throughout the area, and the welding smoke is continuously collected and to meet environmental standards.

image001

1、Air bleed

In order to bring the smoke and smoke into the control direction, suction pipes is designed according to your specific operation and workshop layout, the suction duct is equipped with a network of airflow, Precise design will most effectively control the suction of the smoke - forming layer.

 2、Filter

The suction tube is connected to a filter cartridge which is collected by the filter cartridge when it passes through the suction pipe. The filter is used to clean up the dust periodically, Dust falls to the bottom of the dust collector, the dust container can be easily emptied, and it is dealt with according to the local regulation.

3、Fan

The fan produces a continuous inhalation, the fan size is determined according to the specific system, and install it downstream of the dust collector.

4、Recycle

Filter material has high filtration accuracy, it can reach 99.99%, If the fume dust  is filtered, The filtered air can be recycled, The energy cost can be greatly saved by recycling, especially in the air conditioning environment. The recycled air pushes the smoke layer to the suction pipe through a controlled manner. In order to effectively control the flow of the recirculating air, the recirculation pipeline with air flow network should be designed according to your specific operation and workshop layout.

 

System advantage

Energy conservation

In order to ensure low operating cost, the variable frequency control system can control the fan speed accurately in the condition of changing. The recycling system saves a lot of energy cost.

Reduce fine dust

Because the metal processing workshops, many activities will cause a lot of fine dust, it will affect the performance of the machine and labor performance, vacuum blower system helps to reduce your fine dust in the workplace.

Low noise

Low noise is essential in the use of a continuous recirculation system, which is equipped with a fan installed in a soundproof which enclosure to reduce noise We also installed a pipe muffler to reduce the noise of the air flow from the fan.

Acceptable OES (Occupational impact limits)

The blowing system reduces the working environment to acceptable levels.

 

Several machine model for choose:

Mode

WLC-24FTL

Voltage/Phase/frequency

380V/3PH/50HZ

Air volume

36000m³/h

Filter efficiency

99.99%

Filter quantity

16 pcs

Anti-blow valve quantity

16 pcs

Ash bucket capacity

114L

dB

<85db

Compressed air requirement

0.5-0.6MPa

Outside demension

1980*1790*2921mm

Air intake demension

Φ550mm

Option

Anti-explosion

Option

Frequency conversion

Other air volume, as you need, we can customize it.

 

FAQ

Q1. Are you a factory and trading company?

A: We are the biggest industrial dust treatment solution provider in the central of Chin

Q2. What is your terms of payment?

A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.

Q3. Can you suggst me a suitable type?

A: Certainly, Once you give me the keyword, like air volume you need. The most suitable size will be choose to meet your need

Q4. How about your delivery time?

A: Generally, it will take 7-30 days after receiving your advance payment. The specific delivery time depends on the items, transportation ways and the quantity of your order.

Q5. Can you produce according to the samples?

A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q6. Where is your factory? How can I visit?

A: Our factory located in Huanghhua Industrial Park, Changsha city, Hunan Province, China. All our clients, from home or abroad, are warmly weclome to visit us.

Q7. Do you test all your goods before delivery?

A: Yes, we have 99% test before delivery, we will also show you video before shipment.

Q8: How do you make our business long-term and good relationship?

A:1. We keep good quality and competitive price to ensure our customers benefit;

We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.


Hot Tags: industrial dust extraction system, China, suppliers, manufacturers, factory, price
Similar Product Recommend