-
E-mail
export@wedhb.com
- Phone
-
Address
Changjie North Road, Chagnsha City, Hunan Province, China
Membership
Help
Welldone Environmental Protection Equipment (Changsha) Co., Ltd.Free·1YRS
export@wedhb.com
Changjie North Road, Chagnsha City, Hunan Province, China

Choosing a truly effective dust removal system with relatively low cost is not only about initial equipment investment but also crucial for stable operation and energy saving.
Welldone can provide customers with most effective solutions based on their actual situation on site to minimize harm caused by cuttings' smoke.
◆ Explosion-proof measures need to be considered when cutting alloy materials such as aluminum or magnesium.
◆ When processing workpieces containing oil, pre-treatment devices should be added to dust removal equipment.
◆ Variable frequency control can be used when high power is required for dust removal systems.
Side suction dust removal system - divided into single blow-suction type and double suction type.
The single blow-suction method involves placing a square suction duct on one side of the cutting platform, along with a movable suction port that moves in tandem with the cutting machine. On the opposite side of the platform is a blowing port equipped with an axial flow fan. Both ports are fixed to the cutting machine and aligned with its head.

Double Suction Type
In contrast, the double-suction approach utilizes two square suction ducts placed on either side of the cutting platform, each accompanied by a movable suction port that follows the movement of the machine's head. The lower part of this platform features an exhaust duct fitted with vertical plates that remain within limited width during operation to extract smoke and dust generated during use. A sealing belt adheres tightly to each square suction duct under negative pressure from inside pipes for effective sealing during operation. Each suction port contains two rollers designed to lift up sealing belts so that smoke and dust can be drawn into air intake pipes before being filtered by purification equipment.

Gantry plasma and flame cutting machines often utilize side suction dust removal systems.
For effective cutting widths of less than 5 meters, a blow-suction type system is recommended. For widths greater than 5 meters, a double suction type system is preferred.
When welding aluminum, magnesium and other alloy materials, explosion-proof measures need to be considered!
When welding workpieces containing oil, the dust removal equipment needs to increase the pre-treatment device!
When the power of the dust removal system is large, variable frequency control can be used!

Hot Tags: fume control in flaming and plasma cutting, China, suppliers, manufacturers, factory, price, dust and fume extraction, portable extraction unit, solder fume extractor, smoke extractor, dust collector filters, blasting cabinet dust collector