ANP380 Flush Diaphragm Pressure Transmitter is a flat film pressure measurement product that directly senses the pressure signal by welding the diaphragm to the front end of the process interface, takes the diffused silicon chip as the sensitive element,
ANP380 Flush Diaphragm Pressure Transmitter is a flat film pressure measurement product that directly senses the pressure signal by welding the diaphragm to the front end of the process interface, takes the diffused silicon chip as the sensitive element, cooperates with the special digital circuit, and outputs the industrial standard signal after signal amplification, linear compensation, anti- interference, surge-proof and another signal processing.
-100kPa…0kPa ~ 10kPa…10MPa(Clamp)
-100kPa…0kPa ~ 10kPa…100MPa(Thread)
2 times of Pressure Range or 110MPa (Min)
Gauge Pressure, Absolute Pressure, Sealed Gauge Pressure
2-wire 4 ~ 20mADC;8 ~ 30VDC
3-wire 0 ~ 10VDC;14 ~ 30VDC
3-wire 0 ~ 5VDC; 8 ~ 30VDC
3-wire 1 ~ 5VDC; 8 ~ 30VDC
3-wire 0.5 ~ 4.5VDC;8 ~ 30VDC
4-wire RS485 Modbus-RTU;8 ~ 30VDC
±0.25% FS ±0.5% FS(Typical )
±0.2%FS/ Year
Temp. Coeffi cient of zero
< 100KPa ±0.05%FS/℃
≥ 100KPa ±0.03%FS/℃
Temp. Coeffi cient of span
< 100KPa ±0.05%FS/℃
≥ 100KPa ±0.03%FS/℃
0℃~ 70℃
-30℃~ 80℃(plug) -10℃~ 70℃(cable)
-40℃~ 120℃(plug) -20℃~ 85℃(cable)
≤(-8V)/0.02A(Ω)
≥ 10KΩ
IP65(B1)
Media should be compatible with 316L and FKM
DIN43650
FKM