Welcome Customer !

Membership

Dongguan Pure-Air Tech Co., Ltd.
Free Member ·1YRS
DongGuan,GuangDong
Manufacturer

Main Products: Dust Collector|Industrial Vacuum Cleaner|Household Air Purifier

Xwboo>Products

Dongguan Pure-Air Tech Co., Ltd.Free·1YRS

  • E-mail

    sales@pure-airtech.com

  • Phone

    0086-18676972919

  • Address

    Building 27, Huakecheng Innovation Industrial Park, Chang ping, Daojiao Town, Dong guan City, China

Contact Now

PCB Board Drilling Vacuum Cleaner

Model
Nature of the Manufacturer
Manufacturer
Product Category
vacuum cleaner
Place of Origin
City, Province
Overview
Pure-Air PA-22LT-HP / PA-55LT-HP high negative pressure vacuum cleaner is suitable for the purification of smoke and harmful gases in the production process of laser cutting and drilling of circuit boards, and laser etching.
Product Details

Working Principle

The high-performance fan in the purifier generates negative pressure and sucks the smoke and exhaust gas into the filter, which is purified by the imported High efficiency filter cartridge and discharged indoors. The filter cartridge can be repeatedly used after being sprayed with compressed air.

PCB board drilling vacuum cleaner

Features and advantages


(1). Special structure design, small volume, low operating noise, and movable;

(2). Using special aluminum alloy impeller and Siemens Three phase motor, perfect combination of negative pressure and flow; stable operation, low failure rate, continuous operation;

(3). Set the main power switch, the electric control element adopts thermal overload protection, phase loss and phase sequence protection, high safety, and can realize remote control and linkage control functions;

(4). Japanese Toray high-efficiency membrane filter cartridge is standard configuration, and the dust filtration efficiency is up to 99.7%@0.3 microns (note: our company's self-test);

(5). A fire-stop device is installed at the Inlet to prevent direct contact between sparks and the filter cartridge and damage the filter cartridge;

(6). A manual dust removal door is set to clean the dust inside the machine to prevent dust leakage;

(7). The universal joint suction arm can hover at any position at 360 degrees. The Smoking hood adopts a large-caliber design to inhale smoke and dust with maximum efficiency; the Smoking arm hose is made of polyester, which is fire-resistant and flame-retardant.

Product Detail

♦ The power system adopts Siemens three-phase asynchronous motor, equipped with special customized aluminum alloy impeller, perfect combination of negative pressure and flow, stable operation, low failure rate, low noise, and can work continuously for 24 hours.

vacuum cleaner motor

♦The main electronic control components of the electrical system adopt the international famous brand-French Schneider. Independent control of electric box, built-in AC contactor, thermal overload protection, phase sequence protection such as phase loss and reverse phase. The control panel is simple and clear, and can easily realize the remote linkage control function.

Schneider Electronic Components

♦ High-efficiency PTFE coated filter cartridge, high filtration accuracy   The filter system is equipped with Japanese Toray PTFE membrane filter cartridges as standard, and the filtration accuracy for dust with a diameter of 0.3 microns or more can reach 99.5% or more. A variety of filter cartridges of different materials are also available.

♦Patented automatic rotating pulse back-blowing technology, the cleaning effect is 3 times higher than the traditional method   The pulse blowback system is composed of gas storage tank, solenoid valve, pulse controller, automatic rotating injection components, etc.

When the pulse controller sends out a pulse signal, the solenoid valve starts to work. The high-pressure air jetted out at a very high flow rate enters the inner wall of the filter cartridge through the automatic rotating blowing assembly, causing the filter cartridge to expand sharply, causing shock and vibration, and causing the smoke and dust attached to the surface of the filter cartridge to be shaken off into the dust collecting drawer.

vacuum cleaner for PCB board drilling

♦ Drawer dust box, practical and convenient   The dust box adopts a drawerstructure. When there is a lot of dust accumulation, open the door, pull outthe dust box to clean up the dust, and then send the dust box in aftercompletion. Convenient, fast and practical.

♦ Industrial casters, non-slip and wear-resistantThemachine casters are made of top-grade polyurethane (PU), and the bracket ismade of 2.5mm pickling board to increase the reinforcement. The 3 inch casterscan carry 150kg each, and the tread is designed to enhance the anti-skidperformance.

vacuum cleaner

Appearance

laser dust collector

NO.

Name

NO.

Name

1

Power Indicator

9

Air outlet

2

Running lights

10

switch

3

Stop indicator

11

Power outlet

4

Differential pressure gauge

12

hinge

5

Stop switch

13

Inlet

6

Run switch

14

Plastic clasp

7

Emergency stop switch

15

Casters

8

Hasp

 

 

model

PA-200LT-HP

PA-320LT-HP

PA-450LT-HP

Max air flow

200m³/h

320m³/h

450m³/h

Suction pressure

20000Pa

22000Pa

28000Pa

input power

3.0KW

5.5KW

7.5kw

Voltage frequency

380V,50HZ

Filter type

H13High efficiency filter cartridge

(325*450mm)

H13 deep pleat filter(190*360*210mm)

H13 deep pleat filter(190*360*210mm)

Gas filter(410*410*100mm)

Gas filter(430*430*100mm)

Gas filter(500*600*100mm)

Working noise

≦68 dBA

≦70 dBA

≦75 dBA

Machine size

600*700*1350mm

700*750*1450mm

850*850*1550mm

weight

150kg

180kg

250kg

Inlet Diameter

50 mm

75 mm

100 mm

Similar Product Recommend