The Heating Jacket Target Plate Flow Meter for Bitumen is configured base on the inline type target plate flow meter ,the flow meter configured heating jacket which will keep the fluid warm and heated when it flows through the flow meter.the heating jacket could be driven by the steam or thermal oil.The heating jacket Target plate flow meter is normally used for the fluid which need to be heated to get the fluently flow such as bitumen,glue,resin,heavy oil etc. Now the heating jacket target plate flow meter is wide......
Product Details
Heating Jacket Target Plate Flow Meter
The Heating Jacket Target Plate Flow Meter for Bitumen is configured base on the inline type target plate flow meter ,the flow meter configured heating jacket which will keep the fluid warm and heated when it flows through the flow meter.the heating jacket could be driven by the steam or thermal oil.The heating jacket Target plate flow meter is normally used for the fluid which need to be heated to get the fluently flow such as bitumen,glue,resin,heavy oil etc. Now the heating jacket target plate flow meter is widely used in chemical and oil industry.
Measure Medium
Oil,Chemical,Steam,Asphalt,Syrup
Nominal Diameter&Rated Pressure
Flange:DN15-DN300(1.6-10MPa)
Clamp:DN15-DN300(1.6-10MPa)
Insert type:DN150-DN1500(1.6-10MPa)
Screw:DN15-DN50(1.64MPa)
Span
1.0m³/h-30680m³/h
Rated Pressure
2.5MPa
Accuracy Level
±1%(Full Span)
Temperature of Medium
-40℃-+200℃
Environment Temperature
-40℃-+85℃
Power Supply
24VDC or 3.6V lithium battery(Lifetime>3yrs)
Signal Output
4-20mA
Sensor pipe material
SS304/SS316L
Ex-proof Level
ExiaIICT5/ExdIIBT6
Wire Joint
1/2NPT inner screw or M20*1.5 inner screw
LCD showing range
instantaneous flow:0-50000
integrated flow:0- (restoration automatic)
Shell Material
Cast Aluminum
Loaded Character
RLmax=50(votage-12)Ω@24V
Protection Level
IP65
Heating Jacket Target Plate Flow Meter Product characteristics:
A medium with high viscosity and sediment.
Accurate measurement, high accuracy, up to 0.2% (special order).
The pressure loss is small, only about 1 ≤ 2 P of the standard orifice plate, and the large caliber is obviously reduced.