Welcome Customer !

Membership

ACE METER TECHNOLOGY CO.,LIMITED
Free Member ·1YRS
DaLian,LiaoNing
Manufacturer

Main Products: Flowmeter

Xwboo>Products

Salt Water Electromagnetic Flow Meter For Chemical Industry

Model
Nature of the Manufacturer
Manufacturer
Product Category
Electromagnetic Flow Meter
Place of Origin
City, Province
Overview
Salt water electromagnetic flow meter measures salt water. Electromagnetic flowmeter is suitable for measuring chlor alkali. Chlor alkali industry mainly measures salt water and caustic soda. The new salt water electromagnetic flow meter is very different from the old analog or non intelligent flowmeter, especially in the measurement accuracy, reliability, stability, use function and service life.
Product Details

salt water electromagnetic flow meter for chemical industry


Salt water electromagnetic flow meter measures salt water. Electromagnetic flowmeter is suitable for measuring chlor alkali. Chlor alkali industry mainly measures salt water and caustic soda. The new salt water electromagnetic flow meter is very different from the old analog or non intelligent flowmeter, especially in the measurement accuracy, reliability, stability, use function and service life.



salt water electromagnetic flow meter for chemical industry

salt water electromagnetic flow meter for chemical industry (2)





Measure Medium

Water,Sewage,Acid,Alkali,Slurry,Milk

Nominal diameter

15-500mm

Degree of accuracy

±0.5%R

Medium conductivity

≥5uS/cm,Actual conductivity≥30uS/cm

Nominal pressure

1.0MPa

1.6MPa

2.5MPa

4.0MPa

DN15-DN500

DN15-DN500

DN15-DN500

DN15-DN50

Highest medium temperature

Compact type

+80℃

Remote type

CR chloroprene rubber liner (CR)

+80℃

Polytetrafluoroethylene lining(F4)

+120℃

Politef lining(F46)

+120℃

Teflon(PFA)

+180℃

Fluorosilicone rubber(FVMQ)

+250℃

Output signal

4-20mA;Pulse/Frequency 2kHz(Default),5KHz(Max)

Supply voltage

110/220VAC(100-240VAC),50Hz/60Hz;24VDC ±10%

Communication

RS-485,Support standard Modbus-RTU protocol;GPRS

Electrode material

Stainless steel 316L,Hastelloy C,Hastelloy B,titanium, tantalum, platinum

Level of protection

Remote type

IP68,IP65

Compact type

IP65


salt water electromagnetic flow meter for chemical industry Characteristic:


1. There are no movable parts and flow Arrestor in the electromagnetic flow meter of salt water, which will not cause pressure loss, wear, blocking and other problems.

2. The salt water electromagnetic flow meter is a volume flow measurement instrument, which is not affected by the temperature, viscosity, density and conductivity (within a certain range) of the measured medium in the measurement process.

3. The range of salt water electromagnetic flowmeter is wide, up to 1:100. In addition, the electromagnetic flow meter of desalted water is only proportional to the average velocity of the measured medium, and has nothing to do with the axisymmetric flow state (laminar flow or turbulent flow).

4. Salt water electromagnetic flowmeter has no mechanical inertia, sensitive response, can measure the instantaneous pulsating flow, and has good linearity, so it can directly convert the measured signal into the standard signal output with the linear converter.

5.The temperature of both media is below 100℃. According to the characteristics of the measured medium and the advantages of the electromagnetic flowmeter, it can be seen that the salt water electromagnetic flowmeter is very suitable for chlor alkali measurement.it has high accuracy, small maintenance, long service life and high value performance.

salt water electromagnetic flow meter for chemical industry (3)

salt water electromagnetic flow meter for chemical industry (4)

salt water electromagnetic flow meter for chemical industry (5)

salt water electromagnetic flow meter for chemical industry (6)


.

salt water electromagnetic flow meter for chemical industry