Welcome Customer !

Membership

ACE METER TECHNOLOGY CO.,LIMITED
Free Member ·1YRS
DaLian,LiaoNing
Manufacturer

Main Products: Flowmeter

Xwboo>Products

Large Calibre Steam Orifice Flowmeter

Model
Nature of the Manufacturer
Manufacturer
Product Category
Throttling Flow Meter
Place of Origin
City, Province
Overview
Now the heating form of CHP has been widely used in large and medium-sized heating companies, the main advantages are that the heat source is guaranteed, and the price is low. This form of heating has been used for many years. For the steam pipeline from the power plant to the heat exchange station, orifice flowmeter is installed at the outlet of the power plant to measure the flow and consumption of steam.The so-called orifice flowmeter is to install a circular plate with a hole in the middle inside the pipe, and ......
Product Details

Large Calibre Steam Orifice Flowmeter



Now the heating form of CHP has been widely used in large and medium-sized heating companies, the main advantages are that the heat source is guaranteed, and the price is low. This form of heating has been used for many years. For the steam pipeline from the power plant to the heat exchange station, orifice flowmeter is installed at the outlet of the power plant to measure the flow and consumption of steam.



Large Calibre Steam Orifice Flowmeter_01

Large Calibre Steam Orifice Flowmeter_02


Nominal diameterDN15-1800mm
Accuracy±0.5%R/1.0%
MediumGas, steam and various kinds of liquid
Temperature≤540℃
Pressure0.6mpa~40mpa
Range ratio15:1
ConnectionFlange
Body materialstainless steel
Power supply24VDC(must be equipped with differential pressure transmitter)
Output4~20mA;HART
Explosion proofExiaIICT4
ProtectionIP65 or IP68
EnvironmentEnvironment:-20~60℃

The measurement error of orifice flowmeter is mainly caused by the following three reasons:

1. Installation is not standard

Before installing orifice flow meter, be sure to understand the steam condition (design temperature, design pressure, etc.), pipeline condition, pressure element condition and sensor condition. According to the installation specification of orifice flowmeter, make an accurate installation plan. When installing orifice flow meter, construction shall be carried out in strict accordance with the installation plan. After the installation of orifice flowmeter, it is necessary to check the installation parts frequently to ensure the accuracy of measurement.

2. Untimely maintenance or misoperation

For the parts of orifice flowmeter, especially the parts of the source, the position accuracy inspection should be carried out frequently to ensure that the differential pressure displayed by the differential pressure sensor is the real differential pressure measured by the orifice. When the flowmeter is operated at ordinary times, it shall be done in strict accordance with the operating procedures to avoid misoperation and damage to the meter.

3. Change of process system or working condition

In the use process, if the working condition of the steam changes, the parameters of the secondary instrument should be modified in time to avoid the measurement error caused by the conversion error.

In the application engineering of orifice flowmeter, if there is any error, it can be analyzed from these three aspects, and then find the solution.

Large Calibre Steam Orifice Flowmeter_04

Large Calibre Steam Orifice Flowmeter_05

Large Calibre Steam Orifice Flowmeter_06

Large Calibre Steam Orifice Flowmeter_07




Large Calibre Steam Orifice Flowmeter

Similar Product Recommend