Corrosive Resistant Magnetic Level Meter for Chemical is covered by PTFE material which will ensure the wetting part of the level meter has good ability on chemical corrosive resistance.The magnetic level indicator is an externally mounted chamber with visual indicators that are completely isolated from the process liquid. Inside the chamber is a magnetic float that rises and falls with the level of the liquid. When the float moves, it causes flags inside the chamber to turn and mark the level on an exterior indica......
Product Details
Magnetic Level Meter for Chemical
Corrosive Resistant Magnetic Level Meter for Chemical is covered by PTFE material which will ensure the wetting part of the level meter has good ability on chemical corrosive resistance.The magnetic level indicator is an externally mounted chamber with visual indicators that are completely isolated from the process liquid. Inside the chamber is a magnetic float that rises and falls with the level of the liquid. When the float moves, it causes flags inside the chamber to turn and mark the level on an exterior indicator numbered roughly like a meter stick. Magnetic gauges are often used in conjunction with through-air or guided wave radar as a redundant level measurement.
Measure Medium
Water,Oil,Chemical
Measuring Range
300mm-15000mm
Accuracy
±10mm
Float Diameter
10mm
Working Pressure
≤2.5MPa
Anti-Corrosive Type(≤0.6MPa)
Medium Density
0.5~2g/cm³
Medium Temperature
-20℃~250℃
Medium Viscosity
≤0.4PaS
Ambient Vibration
Frequency≤25Hz
Wave≤0.5mm
Following Speed
≤0.08m/s
Install
Side Install
Top Install
Bottom Install
Protect Grade
IP65
Ex-proof Grade
ExibⅡCT4
Signal Output
4-20mA / Switch
Product Feature of Magnetic Level Meter for Chemical
According to the different working media, stainless steel, stainless steel lining tetrafluorine, ABS engineering plastics and PP-R,PVC four kinds of materials, among which ABS,PP-R,PVC, stainless steel lining tetrafluorine material is suitable for acid, alkali and other corrosive media.