Manufacturer′s High-Precision Gear Meter High-Pressure Resistant 45MPa Resin and Glue Measurement...

Application:

The FM500 gear flow sensor is widely used in various
industries for accurate measurement of low flow, suitable
for media: additive fuel, water treatment flotation tank,
corrosion inhibitors, catalysts, emulsifiers, oils, oils,
spices, adhesives, solvents, inks and pesticides and other
parts of high viscosity media. Application industries
include auto, aviation, mining, electric power,
chemical, pharmaceutical, food, paint, petroleum,
environmental protection, printing and other industries. .
Particularly suitable for heavy oil. Polyvinyl alcohol
resin, etc. The flow measurement of high viscosity medium.
(can measure the viscosity is as high as 10000 pa. S fluid)
small volume, light weight, runtime vibration noise and
stable operation. Can also be used for measuring the small
flow of small diameter measurement. Pick up small flow rate,
range than wide, suitable for use in measuring conform to
the changes of fluid flow, measuring accuracy is not
affected by pressure and flow change, stable performance and
long service life, large flow capacity.
- resin and glue measurement
- measurement of hydraulic oil, lubricating oil and grease
- fuel oil measurement
- ink and asphalt measurement
- measurement of liquid nitrogen, freezing liquid and
solvent
- measurement of edible oil, fish oil and food filling
- fluid measurement for chemical and anticorrosion
requirements
- fluid quantification control system

Technical Parameters:
Measuring range: 5-300mL/min,0.1-50L/min(customized range is supported)
Output signals: 4-20ma,PNP/NPN
Measurement accuracy: 0.5% f.s.
Repeatability: 0.1% f.s.
Power supply: 16~30VDC
Medium temperature: -30~80ºC (high temperature customized 150ºC)
Withstａnd pressure: aluminum (100bar), stainless steel(400bar),
PP (50bar)
Material: shell: aluminum, stainless steel, display: stainless steel