Meokon MD- FS210 Manufacturer Water-Oil-Gas Multi-Purpose Sensor Electronic Flow Sensor Power Su...

NegotiableUpdate on February 20

Model

Nature of the Manufacturer: Manufacturer

Product Category: FLOW SERIES

Place of Origin: City, Province

Online Consult Contact Information

Overview

Short Description: MD-FS210 series heat flow switch adopts heat diffusion principle. There are two temperature sensors in the probe: one is used as a reference sensor to measure the temperature of the medium, and the other is used as a measurement sensor after being heated. The temperature difference between the two sensors is used as the basis for measuring the flow velocity. When the flow velocity of the medium increases, the temperature difference decreases, and vice versa. The temperature difference ......

Product Details

Application:

- Hydraulic/lubrication
- Pump – Cooling system
- Ventilation system
- water treatment
- Leak detection
Technical Parameters:
1.Measuring range
Water: 1… 150cm/s (the default display value is demarcated in
water and specified in other media)
Oil: 3… 300cm/s
Air: 20… 2000cm/s
2.Measuring medium: water, oil, gas and other compatible stainless steel medium
3.repetitive:1%@<0.6m><1.5m ;10%@="">1.5m/s
4.pressure:100bar(300bar optional)
5.Initialization time:1…8s
6.Response time: Typical value2s
7.power supply voltage:18-30Vdc
8.No load current consumption:≤40mA,24Vdc
9.Switch output (normally open + normally closed)
Output type: PNP/NPN/ relay optional/normally on/normally off can be set
Load capacity: 500mA at 24Vdc power supply (NPN and PNP type)
60W (relay type)
10.Wiring protection: Reverse phase, overload, short circuit protection
11.Display:
Design: 3 red leds (flow rate < switching="">
1 yellow LED (flow rate = switching point)
4 green leds (flow velocity > switching point)
12.Temperature:
Working/storage temperature: -40… 85 ºC
Medium temperature: -20… 85 ºC (- 30… 120 ºC)
13.material
Case: 304 stainless steel
Probe: stainless steel 304/ stainless steel 306L
14.Protection level: IP67
15.Appearance: M12*1 connector