Instrument Transformer Boost Device

NegotiableUpdate on September 11

Model

Nature of the Manufacturer: Manufacturer

Product Category: CT Analyser

Place of Origin: City, Province

Online Consult Contact Information

Overview

This booster is a dedicated supporting instrument for the volt-ampere characteristic tester (hereinafter referred to as the volt-ampere host). The maximum voltage reaches 2500V, and the maximum current is 3A. Used for high inflection point (inflection point voltage greater than...

Product Details

I. Overview

This booster is a dedicated supporting instrument for the volt-ampere characteristic tester (hereinafter referred to as the "volt-ampere host"). The maximum voltage reaches 2500V, and the maximum current is 3A. Used for high inflection point (inflection point voltage greater than 1000V) current transformer or voltage transformer volt-ampere characteristic test and AC withstａnd voltage test with withstａnd voltage greater than 1000V.

II.The characteristics of the instrument

1. Large output capacity: the rated output capacity of the instrument is 5kVA.

2. High boost voltage: the highest boost voltage is 2500V, and the maximum current is 3A.

3. High resolution: voltage resolution is 0.1V, current resolution is 1mA.

3. Simple wiring: each function uses independent terminal, wiring to order, easy to learn and use.

4. Flexible configuration: It can be used in conjunction with the VA host according to requirements, and the VA host can also be used independently.

III.Technical parameters

Host power input voltage	AC380V	AC220V
External booster	0～2500V、0～3A	0～2000V、0～3A
Resolution	0.1V、1mA
Precision	≤0.5%
quality	25kg
volume	360（L）340（W）335（H）mm³

IV、Instructions

4.1 Scope of use

This booster can only be used in conjunction with ct pt test set, and has the following two functions:

1. Used for high inflection point (inflection point voltage greater than 1000V) current transformer or voltage transformer volt-ampere characteristics test;

2. Used for AC withstａnd voltage test with AC withstａnd voltage greater than 1000V.

Note: It is strictly forbidden to use a booster for other tests.

4.2 Current transformer operation

1）. Volt-ampere characteristic booster parameter setting: in the current transformer volt-ampere characteristic test interface. Measurement method selection: booster, the maximum output voltage and maximum output current are set according to the tested product.

2）. AC withstａnd voltage booster parameter setting: in the current transformer AC withstａnd voltage test interface. Measurement method selection: booster, test voltage is set according to test requirements. Setting principle: When the AC withstａnd voltage test voltage is greater than 1000V, the measurement method selects a booster. At this time, the default voltage of the instrument is 1500V.

Wiring of AC withstａnd voltage booster: The wiring method of the booster is shown in Figure 5. The test method is the same as that of the single volt-ampere host.

4.3 Voltage transformer operation

1）. Volt-ampere characteristic booster parameter setting: in the voltage transformer's volt-ampere characteristic test interface. Measurement method selection: booster, the maximum output voltage and maximum output current are set according to the tested product.

2）. AC withstａnd voltage booster parameter setting: in the AC withstａnd voltage test interface of the voltage transformer. Measurement method selection: booster, test voltage is set according to test requirements. Setting principle: When the AC withstａnd voltage test voltage is greater than 1000V, the measurement method selects a booster. At this time, the default voltage of the instrument is 1500V.

Wiring of AC withstａnd voltage booster: The wiring method of the booster is shown in Figure 9. The test method is the same as that of the single volt-am