Cable Break Detector

The HM6050C cable break detector produced by our factory is especially suitable for fast and accurate positioning of cable-to-ground insulation faults, (live) path finding, and deep positioning.

The cable break detector is designed based on the electromagnetic induction method and the application of the communication principle. Contains more user-friendly design in use. The large-screen LCD displays the signal strength, and the bars, arrows and voice prompts make it easy for the operator to determine the location of the cable underground and the point of failure. One person can complete all operations.

The cable break detector can be used to find the cable (live or uncharged) path, and it can also be used to find the direct buried cable fault. It can complete tasks that were only possible with the past few sets of instruments.

The traditional cable fault location concept has been changed. There is no need for high-voltage test equipment, no need to use AC power, no need to analyze the waveform, the wiring is simple and clear, and the method of use is easy to learn.

In the past, when we searched for the cable path, we had to test the power failure of the cable, and some running cables could not be powered off. Using it can easily solve the problem of finding the path of live cables. It can also directly find the path of the 50Hz live cable.

All-digital locator, clear display and reliable positioning

Portable and lightweight, easy to use, quick to find

Built-in rechargeable battery, no need for mains power during testing

With cable buried depth display, current display

Large-screen LCD graphic display, no earphones required during testing

Built-in ohmmeter can measure cable loop resistance

With two functions of cable positioning and fault finding

Insulation faults to ground up to 2MΩ can be found

With backlight function to adapt to night operation

Our factory will make unremitting efforts in the improvement and improvement of products, and continue to introduce new product series with more advanced technology, superior performance and more complete functions, and provide you with solid material guarantee and strong in the field of cable monitoring and testing. Technical support.

HM6050C series cable break detector uses the principle of electromagnetic induction to detect the precise direction and depth of underground cables and locate the open circuit, short circuit and fault points of the cable. It has become the easiest cable break detector to use today. The transmitter's built-in ohmmeter can automatically measure the loop resistance and continuous automatic output impedance matching to ensure the best matching signal. For the cable fault test, this instrument can apply the step voltage method and use the direct-buried cable fault test accessory ("A" frame) to determine the cable-to-ground fault and the cable sheath where the insulation resistance of the direct-buried cable is less than 2M ohms. Fault location; signal strength method can also be used to judge cable open circuit and short circuit faults. Using the coupling clamp, you can find the path of the live cable, use the 50Hz detection function of the receiver, and track the 50Hz power frequency signal sent by the running cable. It is truly multi-purpose and has the best performance-price ratio.

The basic working principle is: electromagnetic signals are generated by the transmitter, and the signals are transmitted to the underground cable under test through different transmission connection methods. After the electromagnetic signal is induced by the underground cable, an induced current is generated on the cable, and the induced current follows the direction of the cable. In the process of current propagation, electromagnetic waves are radiated to the ground through the underground cable. In this way, when the cable break detector is detected on the ground, the electromagnetic wave signal will be received on the ground above the cable. The signal strength changes to distinguish the location, direction and fault of the underground cable.

Standard equipment (composition)

Receiver one

One transmitter

Directly connected signal line one

Ground drill one

Manual set

Rechargeable battery and charger set

"A" frame one set

2. Optional accessories

Coupling clamp one

1. Receiver

Working frequency: low frequency, radio frequency

Antenna mode: valley method (vertical coil), crest method (horizontal coil)

Sound indication: FM tone that changes with signal strength

Current indication: display the effective current value of the cable under test (unit: mA)

Working temperature: -10°C——+55°C

Battery model: 6 AA alkaline batteries

Power indicator: graphic display

Battery life: continuous work> 8 hours: intermittent work> 16 hours

Size: 70×20×11CM

Weight: 3 kg (with battery)

Signal strength indication: ladder diagram, digital range 0-999

Gain control: manual adjustment, dynamic range of 100db

Detection depth: the maximum detection depth is not less than 5 meters

Maximum detection distance: The cable with good insulation in direct connection method can reach up to 15KM

Depth measurement: press the depth key to display three digits, the maximum depth can be measured up to 2.5 meters

Accuracy*: Low frequency: ±(1-5)%≤2.5m Radio frequency: ±(5-12)%≤2.5m

*Depending on the site environment, the shape of non-concentric lines, the number of adjacent pipelines, and the return current of the soil

2. Transmitter

Working frequency: low frequency, radio frequency

Working mode: direct connection method, coupling method, induction method

Matching load: 5 ohms—3000 ohms

Impedance display: five digits

Overheating and overcurrent: automatic protection

Power output: low gear, middle gear, high gear

Battery type: 8 AA alkaline batteries

Battery life: 4 hours to 8 hours of continuous work depending on the frequency and output power during use

Intermittent work for 6 hours to 10 hours depends on the frequency and output power during use

Working temperature: -10°C—55°C

Size: 16×16×39CM

Weight: 4 kg (including battery)