GIS Partial Discharge Fault Simulation Device

GIS partial discharge fault simulation device can simulate various discharge phenomena inside GIS, suitable for experimental research and instrument assessment of GIS partial discharge live detection

Voltage level: 110～500kV;

Partial discharge: ≤1pC;

Adjustment method: manual, electric;

Coupling capacitance: 50pF;

Discharge simulation: tip 5~800pC, particle 0.1~10pC, suspension 100~20000pC, air gap 10~1000pC, along the surface 10~1000pC.

Good authenticity: It is designed according to the physical GIS, and the various partial discharge faults inside the GIS are truly simulated. To

Good integrity: High-voltage equipment such as step-up transformers and coupling capacitors are built into the GIS.

Fault simulation: It can simulate GIS tip, suspension, air gap, particle, creeping and other discharge types, and multiple discharges can be combined.

Controllable discharge: The discharge type can be selected arbitrarily, and the starting voltage, extinguishing voltage and discharge intensity of each discharge signal can be controlled.

Diversified detection: It can provide a test platform for technical detection of pulse current, UHF, ultrasonic, high frequency, SF6 gas analysis, etc.

Measurement transmission: Built-in pulse current method related coupling and verification unit, which can be detected simultaneously. To

Good stability: Each discharge module can be reused, and the discharge characteristics are stable.

Convenient operation: the occurrence and disappearance of various faults can be directly controlled outside the device. To

Diversification of basins: The basin insulators are equipped with various types such as full shielding, bare basin, and pouring port.

Visualization: Built-in infrared video probe, convenient to observe the internal state and capture the discharge video.

Built-in sensor: Built-in ultra-high frequency sensor, which is convenient for comparison with the tested instrument.

We can customization according to your test need.