Cable Identification Tester

NegotiableUpdate on September 11

Model

Nature of the Manufacturer: Manufacturer

Product Category: Cable Fault Locator

Place of Origin: City, Province

Online Consult Contact Information

Overview

Function of Transmitter specification:Transmit complex pulse frequency current signal, display residual battery voltage, transmit dynamic indication of stateOutput ways:clamp input signal for live cable identification; direct output for power off cable identificationFunction of Receiver specification：Identification of live cable and power-off cable; AC voltage, current and frequency test

Product Details

Introduction

Live Cable identifier plays an important role in cable construction and maintenance work. Currently on the market are not only for the instrument power cable identification, there are instruments for live cable recognition, but in the specific use, the actual cable site is often placed together with each other, using the instrument calipers clamping often cannot lead to recognition, and most recognition receiving part still use the pointer meter to indicate. The scene due to vibration failure. And the identification of the scene is often no use of 220V power, resulting in the use of inconvenient.

Based on this, using the current electronic technology to develop a soft coil liquid crystal display cable identification device, the main design change to use the dry battery power supply mode, can well solve the shortcomings of the above equipment, practical work has a very good help

Hot tag：Live Cable Identifier，multi-functional cable identifier，cable identification instrument.

Special note: This cable identification instrument has the functions of live cable identification and power-off cable identification at the same time. When power-off cable identification: it is strictly prohibited to connect to live cable. Live cable identification is only applicable to three core armored cable (with metal shield layer). During identification, the transmitting clamp and receiving clamp shall not be mixed, and the direction of input signal shall be consistent.

Technology specification

Transmitter specification

Function	Transmit complex pulse frequency current signal, display residual battery voltage, transmit dynamic indication of state
Power	11.1V large capacity Li-battery， Full charge continuous operation for about 8 hours
Output ways	clamp input signal for live cable identification; direct output for power off cable identification
Transmit frequency	625Hz、1562Hz、2500Hz、10KHz（power on cable identification），press ↑ ↓ arrow to adjust frequency
Pulse voltage	500V（power off cable identification ）
Pulse current	5A max（depends on circuit resistance）
Pulse frequency	1times/sec
Pulse width	2ms
Test wire length	3m，Crocodile clip，red &black each 1pcs
Transmitter clamp size	LWT=320mm×180mm×35mm
Clamp Jaw dia.	φ125mm
Clamp connect wire	4m
Grounding assist pin size	LWT=225mm×100mm×10mm
Transmitter size	320mm×275mm×145mm
Display mode	Big LCD screen, online display currently battery voltage，with backlight
LCD size	LW=128mm×75mm；display area124mm×67mm
External tool bag size	LWH=400mm×245mm×335mm
Work humiture	-10℃～40℃
Store	-20℃~50℃，≤95％RH, No condensation
Backlight control	White backlight lamp
Work humiture	-10℃～40℃
Weight	Transmitter 2.5kg；Transmitting clamp 1.12kg；total weight 4.44kg（with receiver）
battery	When battery volt lower 9.65V, lower battery symbol display remind charge；when battery volt lower 9.5V，instrument power off automatically
Charger	12.6V DC
Charge port	Circular audio jack，DC
Withstａnd pressure	The transmitter adopts the integrated special toolbox design, and the box can bear the pressure of about 200kg
Insulation	AC 3700V/rms(instrument shell)
Electromagnetic characteristics	IEC61326(EMC)
Comply certificate	IEC61010-1(CAT Ⅲ 300V、CAT IV 150V、pollution II)

Receiver specification

Function	Identification of live cable and power-off cable; AC voltage, current and frequency test
Power	7.4V rechargeable Li-battery, USB charge port, full battery works 6hours
Receiver frequency	625Hz、1562Hz、2500Hz、10KHz
Enlarge	1dB、10dB、20dB press ← → key adjust
Rated current	Approx 300mA max
Display mode	3.5inch LCD
Signal calibration (sampling)	One of condition as the evidence to identify the target cable is current between 75%-135%
Signal calibration (sampling)	Calibrate 1-10pcs of cables, each calibration(sampling) data should be unchangeable after frequency, name and magnification firmed
Direction recognition	Have, one of condition as evidence to identify the target cable is direction consistent with transmitter&receiver
Success identification	Display（√）symbol
Non target cable	Display（×）symbol
Receiver size	LWT=207mm×101mm×45mm
Flexible current clamp	Approx L=630mm， wire diameter 6 mm or 12.5mm
Current clamp jaw	φ200mm（customized）
Connect wire	L：2m
Volt test wire	L:1m (Red/Black each 1pcs)
Measurement Range	Power-off cable identification：this instrument can detect the pulse signal with loop resistance of 0 Ω ～ 10K Ω；(ensure transmitter battery volt over 11v) in general, cable identification length can reach 0-20km，which depends on circuit resistance
Measurement Range	Live cable identification: the instrument can detect pulse signal with loop resistance of 0~200Ω(ensure transmitter battery volt over 11v) In general, cable identification length can reach 0-5km, which depends on circuit resistance
Range	AC volt： 0.00V～600V(50Hz/60Hz)
Range	AC： 0.00A～5000A(50Hz/60Hz)
Frequency：	45Hz~70Hz
Accuracy	AC volt：±2%±3dgt
	AC：±2%±3dgt
	AC frequency：±2%±3dgt
Signal	Colorful signal display
Detecting speed	Approx 1times/sec
Enlarge	At test interface，Press ← → signal enlarge，it is optimum for signal at range 10~100
Backlight	At startup interface, press ↑ ↓ key to adjust LCD backlight brightness
Power off	Automatically power off after standby 30min for saving battery
Battery volt	Battery volt lower 6.5V, low battery symbol display, remaind to charge battery
Charger	9V DC charger
Charge port	USB charge port
Work humiture	-10℃～40℃；80%Rh below
Save humiture	-10℃~50℃，≤95％RH, no condensation
Receiver weight	Current clamp 172g；receiver 370g(with battery)
Withstａnd voltage	AC2000V/rms(between two points of the shell)
Comply certificate	IEC61010-1 CAT Ⅲ 600V，IEC61010-031，IEC61326，pollution 2

Structure

1、FLEXIBLE COIL CONNECT POSITION

2、USB CHARGE PORT（8.4V CHARGER）

3、RECEIVER LABLE POSITION 4、RECEIVER LCD

5、RECEIVER POWER ON/OFF 6、ESC

7、ARROW & ENTER KEYS 8、VOLTAGE TEST JACK

9、FLEXIBLE COIL OUTPUT JACK

10、FLEXIBLE CURRENT CLAMP

11、FLEXIBLE COIL LOOSEN POSITION

12、FLEXIBLE COIL CONNECT WIRE

13、TRNASMITTER LABLE POSITION

14、POWER OFF CABLE CONNECT POSITION

15、TRANSMITTER LCD

16、POWER ON CABLE IDENTIFICATION TRANSMITTER CLAMP CONNECT PLUG POSITION

17、TRANSMITTER FUNCTION KEYS

18、TRANSMITTER DC CHARGE PORT（12.6V CHARGER）

19、EMISSION CURRENT CLAMP

20、TRANSMITTER CLAMP TRIGGER

21、EMISSION CLMAP CONNECT WIRE

22、POWER ON CABLE IDENTIFICATION TRANSMITTER CLAMP CONNECT PLUG POSITION