Cable Identification Instrument

HM505F cable identification instrument is our latest cable determination equipment, to solve the long-standing problem about determine the high-voltage running cable. Thus, it solved the limitations that old generation cable identification can only be used for dead cable cable determination,make the identification of live cable become a reality.

It adopted with the most advanced microelectronic technology in the world .The overall design is more advanced than the conventional cable identification instrument, running more faster and much easier to operate . It the first choice for the replacement of cable testing equipment in power industry.

Hot tags : Cable Identification , cable determination equipment,cable determination

1.Adopts a new cable identification mode,tests can be performed on live or dead cables. And it can identify the cable to be tested with high accuracy .

2. The equipment is composed of transmitter and receiver. And equipped with the corresponding launch pliers(used for identify live cable), straight wire(used for dead cable),receiving pliers and other relevant components.

3. The equipment is powered by lithium batteries,can be widely used in live or non-live construction site.It is very convenient for users to test in any situation.

4. Adopted with single phase DC pulse output, max output current can reach 50A .It can satisfy the determination of conventional power cables.Due to DC pulse output is used , the direction of current flow and the magnitude of current can be used to determine the measured cable, the reliability is greatly improved .

5. The equipment adopts comparative method for cable determination, adopt display mode with double waveform ,compare the field test waveform with the calibration waveform in the machine. When the two are consistent, it can be determined . The identification accuracy is very high,far better than the previous indicator mode.

6. The calibration waveform is automatically stored, and the last calibration waveform and corresponding adjustment parameters will be automatically called when turn on the device each time.

7. This instrument adopts two working modes: test mode and calibration mode.

8. Both transmitter and receiver adopt LCD display, and menu prompt operation, make the operation easier.

9.In the identification of live cable, the electromagnetic coupling output is carried out by using induction transmitter clamp on the cable shell, no longer require power off before testing, thus reduce and avoid the opportunity of power off, improved power supply efficiency.

10. The equipment also has the function of common cable identification.For the cable to be cut off, the output signal can be directly connected to the cable through the direct connection clamp, and can be identified as normal as the conventional live cable .

11.All industrial components are used, with good anti-interference and high and low temperature performance.

12.The receiver adopts 3.5-inch high precision LCD module, which has the characteristics of large field of vision and rich display content. Equipped with backlight, it can display the waveform normally in the sunlight or in the dark.

13. The machine has the function of automatic signal shutdown. In the absence of cable release signal, the receiver will shut down automatically within 5 minutes.

14.Small size, light weight, suitable for field operation.

Transmitter output voltage： >30V

Transmitter output signal ： Pulse DC signal

Transmitter output mode：Coupling clamp induction method（live cable identification） Direct connection method（dead cable identification）

Transmitter output current: 50Amax.

Transmitter output interval： 8-10 seconds every time

ransmitter power supply: 20000mah high-power lithium battery，can meet 8-10 hours continuous working time.

Receiver receiving signal： 20mv~500V

Receiver attenuation regulation： grade 10,1--1000 attenuation ratio can be adjusted

Test mode： inductive method

Work interface： Menu prompt, shuttle operation.

Operating mode : Double waveform comparison

Display screen: Adopt 3.5-inch 240*160 dot matrix forward LCD display ,with large screen and clear picture display, equipped with backlight, suitable for normal display in various environments

Instrument component ：Host + active probe

Power: Lithium iron phosphate battery 14500 3.0V battery, 2pcs

Service time: the continuous service time of the new battery is more than 10 hours

Operating temperature：-5℃～50℃

Storage temperature：-40℃～85℃

Relative humidity ：＜ 90％

Size：Host 180*275*60(mm)

Weight：Host 2000g

Package：High quality aluminum alloy case

Size of package: 320×400×100(mm)

1. Factory Release Test

Products are operated in correct way strictly according to production process .

About qualified product, inspector will issue factory test report and certification of quality .

Sub-quality products are prohibitted to leave factory .

2.Sales, technical consulting

goldhome hipot power company will wholeheartedly provide you with more assured and professional product technology, quotation, service consultation and technical services, and timely provide engineering appointments and product use troubleshooting

After-sales and technical guidance Customers who have purchased or are about to use our products, if they encounter any technical difficulties during use, can directly call the hotline of our technical service department for logistics inquiries, technical consultations, maintenance appointments, return and exchange, etc.

3.Feedback.

user suggestions, feedback you have any questions when using our products or related services about our products, please leave a message to us, our company will arrange staff to call you back within 2 hours