Underground Pipeline Finder

HM230 Underground Pipeline Finder is specially designed for tracing the path and measure the depth of buried live cable or dead cable . At the same time, it has a powerful identification function for a certain target cable under the condition of running or not running. It can achieve a comprehensive and convenient test for power cable migration, channel rectification, operation and maintenance and fault treatment .

Hot tags : underground cable and pipe detector, underground cable location, cable route tracer

1. The design conforms to use of human mechanics habits.

2. Integrated circuit design, with high functional stability

3. Three signal loading methods, covering different requirements of the site

4. With compass indication, greatly improve the test efficiency

5. Powered by low power consumption dry battery , suitable for cable test in wild.

It is mainly composed of transmitter and receiver.The transmitter applies a signal current of a certain frequency to the tested cable,to generate electromagnetic fields around the cable .

The magnetic field intensity varies with the distance between the test point and the target cable.It is equipped with clamps suitable for 380V-220kV anti-magnetic saturation effect, no need to power off the cable.

The receiver uses four high-frequency mutual inductance magnetic sensors in pairs to detect the induced electromotive force and distribution generated by the magnetic field around the cable on the ground, and accurately measure the buried depth information of the underground cable,Combine the compass indication and signal strength on the screen to accurately locate the direction of the underground cable.At the same time, the receiver is equipped with a professional stethoscope, which can identify the target cable to be tested from family of parallel, in-phase cables.

Transmitter

1. Output frequency： 982Hz、9.82kHz、83.1 kHz；

2. Power supply：dry battery or lithium battery, continuous working time no less than 8h

3.Live detection: induction mode and clamp mode.

4.Sensor: made of special manganzn-zinc ferrite material, combined with special winding method, bi-directional magnetic saturation suppression.

5.Three models optional ：Direct model ,induction mode and clamp mode

6. Automatic Identification of mode

7.Three output frequency optional

Receiver

1. With compass indicating function, it can accurately indicate the trend of target cable;

2. With the function of depth measurement, it can measure the buried depth of the target cable.

3. Max detect: 8m

4.With stethoscope, can identify live cable

5. Measurable frequency：50Hz、982Hz、9.82kHz、83.1 kHz

6. Power supply：dry battery or lithium battery, continuous working time no less than 8h

Cable fault test program

Our company is a manufacturer specializing in the development, production and sales of cable fault testers. It not only has strong technical advantages in cable testing, but also has professional after-sales service. For protection. The following are two directional introductions and simple selection suggestions for this series of products. Please select the applicable products according to your company's specific requirements:

1. Please choose a product that is more suitable for you according to your company's use of the site and the funding plan. Not only can the purchase cost be reduced, but also the equipment function can be more economical.

The first model: HM-A30 fully intelligent multi-pulse cable fault tester, technical level in line with international standards, powerful functions, convenient on-site use, fully automatic testing process, automatic waveform analysis card position, high testing efficiency, high purchase cost for the whole set , It is suitable for power, railway, rail transit departments and other units with high efficiency and good economic strength.

The second paragraph: HM-A20 cable fault tester, surpassing the original cable meter single-chip microcomputer era, realizes the rough positioning process on the industrial computer through software, touch pen operation, powerful software, high sampling frequency, small error, and comes with WIFI function , Plus remote control software, suitable for electric power departments, industrial and mining enterprises, petroleum, chemical, metallurgical and other public units.

The third paragraph: HM-A10 cable fault tester, the realization of the function is basically the same as HM-A20 cable fault tester, the difference: 1. The operation mode is not touch pen operation, it is touch mouse operation; 2. Remote control software is optional Match. There are all other advantages, suitable for economic units, such as small industrial and mining enterprises, power engineering units, cable factories and other users.

2. According to the nature of your organization and the cable situation, choose different configuration types, which can not only solve all your faults, but also maximize the function of the equipment.

The first model: Comprehensive and fully intelligent and portable, HM-A30 fully intelligent multi-pulse cable fault tester is equipped with HM-G35 high-frequency and high-voltage power supply, automatic identification and positioning, suitable for all electric power, railway, rail transit departments, etc.

The second paragraph: Comprehensive and portable, HM-A20/A10 cable fault tester is equipped with HM-G25 integrated dedicated high-voltage power supply, very combined, suitable for all power users, industrial and mining enterprises, petroleum, chemical, railway departments, etc.

The third paragraph: the failure test of the outer sheath of the ultra-high voltage cable, the HM-W10 high voltage bridge, the HM-G20 burn-through positioning power supply, and the HM-K10 step voltage tester can solve the problem of direct burying, bridges, trenches and other buried methods. Failure test of high-voltage cable outer sheath.

The fourth paragraph: users of low-voltage cables such as streetlight cables and control cables, HM-A10 is equipped with HM-G25 integrated power supply, with step voltage to solve the failure of such cables with various resistance values and various burying methods.