Single Phase Relay Test Kit

HMJBC-701 Single Phase Relay Test Kit is applied to test protection replay based on voltage and current operation. The main function of the Single Phase Relay Test Kit include calibration of voltage and current operation relays, secondary circuit inspection, trip value of circuit breaker test, switch on and off time measurement of circuit breaker and so on. It’s a low cost, simple operation and reliable performance device for secondary circuit test.

1.DC voltage output: 0—350（V）continuity , max capacity output:960VA

2.AC voltage output: 0—350（V）continuity , max capacity output: 400VA 3.The voltage and current characteristic test for relay coil

Max voltage output is 240V and max current output is 5A.

The duration time at max current is not more than 3 minutes.

4.DC current output:0-10A continuity, max capacity output:80VA

5.AC current output: 0-10A (at max voltage 40V) 0-100A((at max voltage 14V)capacity:1000VA Continuity Output time≤35S

6.AC voltage circuit short connection simulation: voltage output setting≤ 120V,range15~80%.

7.DC constant voltage alternating output (can be used as operating power of static relay)

Output Voltage: 24V、48V、110V、220V,output current: 0.4A

8.Tester Overload protection

1) DC/AC voltage output circuit:5A fuse

2) DC constant voltage output circuit:0.5A fuse

3) 6A fuse for tester power supply

9.DC/AC voltmeter and ammeter adopt 4-1/2 digit to transfer,accuracy:0.5 grade

10.Digital timer: 0.000~9999s error: mantissa ±2 digit

11.Symbol definition for time measurement close operation for open contact from open state close operation for close contact from open state open operation for open contact from close state

open operation for close contact from close state

Drelay operation value test

12.Others

1)Power supply: 220V±10%，50Hz 2)Temprature: -20℃~+40℃ 3)Humidity:≤85%（15~25℃）

1.The Single Phase Relay Test Kit must be grounded reliably before running .

2.Please confirm all output control switch be on off position and reclosing control switch is on 0 before switch function of output.

3.The Single Phase Relay Test Kit is on work condition if the LED shows from 9999 to 0.000 after switch on, It is said the tester has finished the initial procedure. Otherwise the tester has failed to run the initial procedure. There is fault in the tester.

4.Please confirm the regulator is on 0 position before rise the voltage and current output. Otherwise the tester would met short circuit or overload in output circuit.

5.Single Phase Relay Test Kit forbidden to touch the output terminal during make connection for the tester.

6.Please switch the timer to function II when making reclosing test,voltage relay test and DC current relay test.Please switch the timer to function I when making other tests.

Wuhan Goldhome Hipot Electric equipment Co., Ltd .(abbreviated as Goldhome Hipot) is one of the earliest enterprises in China to design and manufacture HV testing equipment. In 2016, the company and Wuhan Sangao Electric Co., Ltd. developed into a joint-stock enterprise because of complementary advantages, resource reorganization. At the same time, Goldhome Hipot has worked closely with experts and professors who are from the National Grid Power Research Institute and Electrical Engineering School,Wuhan University (formerly Wuhan Water Conservancy and Electric Power University) ，now he has become a high-tech enterprisies who is integrated with scientific research and development, production, sales, installation.

Our factory is located in Wuhan Huading Industrial Park, (Economic and Technological Development Zone Hubei), it covers area of more than 4000 square meters, the main products include: hipot tester, GIS PD test system, AC/DC high-voltage test transformer, primary current injection test set ,insulation resistance test meter, Insulation withstａnd voltage test device and other testing instruments. Products are mainly used in Power Supply department, Power plant, Power construction, Railways, Petroleum, Chemical, Metallurgy, Coal and other sectors.

The factor has continued to develop overseas markets in recent years, , and some of its best products have been exported to Europe, America, Southeast Asia and other countries, which are well received by customers.

We adheres to: Seek pragmatic, seek truth, seek perfection, seek innovation as our principles; we insist on that technology is the absolute advantage, quality is the fundamental guarantee, integrity can win the market, innovation is development’s power. Providing the first-class products, first-class services for our client is our motivation to chase.

“Leading technology, quality first, integrity-based, win-win cooperation!" is always our concept . we are expected to build a long term cooperation with you for mutual benefits！

FAQ

1.Is it all right to make customer's own brａnd name?

If the quantity is huge, we accept the customzied brａnd name and logo.

2. Are you a manufactuer or trading company?

we are the ISO manufacturer with 20 years experience in high voltage test equipment's producing.

3. Can you do the design for us?

Sure, if you can provide your detail requirements.

4. Packaging & Shipping:

woodencases with firm foam & by Express, by sea, by Air.

5.What about the lead time for mass production?

Most we have materials at stock, lead time is within 7 days, if there is no material stock,it will take 15-20 days.

6.What are your main products?

high voltage test equipment, transforemer tester, ct pt analzyer, insulation resistance tester,hv switchgear tester, relay tester ,cable fault locator, etc.

7.What is your terms of delivery?

50% deposit, the balance should be paid before delivery or irrevocable L/C at sight

8.When can I get the price?

Regular model, we can quote you within 12 hours. customized model, we will try to reply you within 24 hours.

9.Where is your company?

Wuhan, China.

10.Where is your loading port?

Wuhan, Shanghai, Guangzhou, Ningbo or any other Chinese port as your required.

11.How soon we can get response from your team?

usually, we can reply you within 12 hours.

12.If we have some other product requirements that your page don't include, can you help to supply?

sure, you can contact us by or , we will try our best to assit.

13.What's the list of certificates you holds?

CE , ISO ,any calibration certificate as your required.

14.Are you in stock?

It depends ont the model series and model specifications.

15Does your product have warranty service?

How long is the warranty period?

Yes, we have warranty service! usually, our warranty service is 12 months, but we also can extend our warranty service as your required.

Hot tags:

Microcomputer relay protection tester, microcomputer relay protection instrument, relay protection tester, three-phase relay protection tester, three-phase relay protection calibrator, relay protection calibrator, Three-phase successive protection calibrator.