Secondary Injection Test System

IEC 61850 is the only international standard for intelligent substation automation systems based on a network communication platform. This standard enables information sharing and interoperability between different intelligent electrical equipment. HMJBC-6000 optical digital relay protection tester that fully complies with the IEC 61850 standard, it provides a complete test solution for relay protection and automation devices based on this standard.

Complete optical ports: 16 pairs of 100M-FX optical ports, 12 FT3 transmissions and 2 FT3 receptions, simulating 12 MUs for protection testing.

Unique electrical port monitoring function: It has 1 G network electrical port (1000M network) output function, which can monitor the input and output data during the test. Connect the G network electrical port through a notebook to realize the function of a digital multimeter.

Various standard messages: Various types of messages complying with IEC61850-9-1/9-2/9-2LE, GOOSE, IEC60044-7/8 FT3, FT3LE, etc. can be provided.

Collector output: can provide collector message output from multiple manufacturers.

Merging unit test mode: output the sampled value message of the collector FT3/FT3LE format, and read the merge unit 9-2 or FT3 message at the same time, and measure the ratio and angle difference of the merge unit.

Network analyzer function: grab IEC 61850 or FT3 data packets, display and record data waveforms, and simulate frame loss and garbled codes in the output.

Small signal output function: 12 channels of small signal analog output, providing protection device testing for small signal input.

Optical digital signal test: It can simulate packet loss, garbled code, SMV data error and provide GOOSE storm test.

Output waveform visualization: The original 24-channel output waveform recovery and recording, visually display the output waveform of the machine or external equipment and digitally record the waveform, which solves the problem that digital protection cannot directly measure and display the waveform.

Complete analysis of protection model files: Complete analysis of SCL (SCD, ICD, CID) files, automatic configuration of SV, GOOSE information, and flexible and convenient interface with various types of protection.

Multiple time synchronization modes: second pulse, IRIG-B code or IEEE1588 time synchronization can be used.

Built-in GPS module: GPS is directly controlled, and can be synchronized to test on both sides, and perform fiber longitudinal differential protection and other tests.

Strong compatibility: The test interface and operating habits of the same style as the traditional relay protection instrument are convenient for testers to get started quickly.

Dual operation mode: Built-in industrial computer, can be operated by a single machine, and can be operated by a computer. The functions of the two modes are completely consistent, a truly complete dual operation mode.

Ethernet communication interface

Model: 10/100Base-TX (10/100Mbit, twisted pair, automatic crossover)

Number of ports: 2

Interface type: RJ45

Optical fiber communication interface

Model number: 100Base-FX (100Mbit, optical fiber, full duplex)

Number of ports: 16 pairs

Interface type: ST

Optical cable model: 62.5/125μm (multimode fiber)

Wavelength: 1300nm

FT3 interface

Number of ports: 14 (12 for sending, 2 for receiving)

Interface type: ST

Optical cable model: 62.5/125μm (multimode fiber)

Wavelength: 1300nm

Small signal analog output

Output channels: 12 channels

Output range: AC: 0~10Vrms

Output accuracy: <0.05%

Switch input

Quantity: 10 channels

Characteristics: self-adaptive with potential or empty contact

Switch output

Quantity: 8 channels

Capacity: AC250V/0.5A DC250V/0.2A

Founded in 2008 ,as predecessor is the State owned tertiary Enterprises enterprises. our primary business was sale, design and manufacture high-voltage transmission and insulation test set.

Our factory is located in Wuhan Huading Industrial Park, (Economic and Technological Development Zone Hubei), it covers area of more than 4000 square meters, the main products include: hipot tester, GIS PD test system, AC/DC high-voltage test transformer, primary current injection test set ,insulation resistance test meter, Insulation withstａnd voltage test device and other testing instruments. Products are mainly used in Power Supply department, Power plant, Power construction, Railways, Petroleum, Chemical, Metallurgy, Coal and other sectors.

The factor has continued to develop overseas markets in recent years, , and some of its best products have been exported to Europe, America, Southeast Asia and other countries, which are well received by customers.

Our factory has always put quality as the lifeline, product quality, working quality and service quality are in strict accordance with the ISO9001: 2015 management system.

Our factory will as always adhere to Truth-seeking, Refinement, Innovation, adhere to technology as an advantage, quality assurance, integrity to win market, innovation and development. Dedicated to power sector, large factories and mines, electrical testing workers to provide first-class products, first-class service.

We strictly implement the concept of "customer-centric, integrity in business world" to provide customers with high-quality pre-sales, in-sales and after-sales services!

1. Dear customers, no matter what you need, as long as you contact us, we will do the rest!

2. Our customer service staff will provide you with professional product consultation and technical answers.

3. Understａnd your demands, establish product service records, and negotiate with you to determine after-sales service methods

4. If necessary, we will arrange professional technical engineers to provide you with video, telephone contact, and on-site debugging services in the way agreed with you!

5. The engineer will explain to you the working principle and test operation steps of the product in detail.

6. The engineer will guide you on-site,video to complete the entire test process, and give professional answers to your technical questions.

7. The engineer will also conduct a comprehensive inspection for the product you purchased, and solve it if there is a fault.

8. After the service is completed, please provide valuable comments or suggestions on our service, and the service information will be synchronized to the after-sales service center.

9. The after-sales service center will actively follow up the service progress and regularly follow up the return visits.