Partial Discharge Test Equipment

Partial discharge test equipment most include two structures: PD oil-filled hv insulated testing transformer and sf6 insulated PD hv testing transformer. For higher voltage and consider the convenience operation at site, our company design and research one new model: GTU partial discharge test equipment. It is applicable to partial discharge measurement and power frequency withstａnd voltage test of cable accessories below 110kV and voltage level. It can also be used as power frequency withstａnd voltage and partial discharge test for other electrical products with similar voltage levels and below. The whole set of equipment can realize the on-site error verification of 500 k V , 330kV , 220k V , 110kV , capacitive voltage transformer ( CVT ), inductive voltage transformer and GIS voltage transformer. Meet the on-site calibration error guarantee system to ensure accurate and reliable on-site calibration data.

Hot tags: SF6 insulated HV with PD tester manufacturer,Partial discharge tester,pd tester supplier

Environment temperature ：-10℃～+50℃；

RH: +25℃,Less than 90%；

Altitude：less than 1000m；

Earth-quack resistance capacity：8 class；

Atmospheric pressure：0.1Mpa；

Atmospheric humidity：11g/m3；

Use environment ：In door,outdoor

No conductive dust；

No fire and explosion hazard；

Gases that do not contain corrosive metals and insulation；

The waveform of the power supply voltage is the actual sine wave.

Waveform distortion rate＜3%；

Have a reliable grounding point，Grounding resistance＜0.5　

1.The equipment is small and available with minimal space

2.Components are light in weight

3.Rugged structure capable of handling long distance transportation

4.Direct connection with the subject

5.All high voltage parts are encapsulated in airtight space to ensure high safety of operators

6.Wide range applications, adding installation bushings can do normal withstａnd voltage testing.

7.Built in high voltage measurement and PD coupling capacitor

8.Built in high voltage isolating switch, which can separate interface of multiple test products, to ensure safety of high voltage test.

Specification can be customized according to client’s requirements.

1.We guarantee that professional engineers and technicians will answer questions by telephone, or other channel within 1 hour, deal with equipment failure in time within 24 hours.

2.Upon receipt of the client's request for after-sales service,we promises to provide solutions within 48 hours.

3.We will provide relevant technical training and technical information according to client's requirements.

4.The product can be repaired free of charge for one year and maintained for life.