Welcome Customer !

Membership

Hand Industrial Co.,Limited
Free Member ·1YRS
,
Other

Main Products: 紧固件

Xwboo>Products

Stainless Steel Square Cage Nut

Model
Nature of the Manufacturer
Other
Product Category
Square type nuts
Place of Origin
City, Province
Overview
Stainless Steel Square Cage Nut
Product Details
  • Stainless Steel Square Cage Nut

    Introduction

    A square nut is a four-sided nut. Compared to standard hex nuts, square nuts have a greater surface in contact with the part being fastened, and therefore provide greater resistance to loosening (though also greater resistance to tightening).They are also much less likely to become rounded-off after repeated loosening/tightening cycles. Square nuts are typically mated with square-headed bolts. Square nuts are used along with flat washers in order to avoid damage from its sharp edges and increase the strength of the fastener.Square nuts can have standard, fine or coarse threading with plating of zinc yellow, plain, zinc clear, tin.


    Advantages and Services

    Various hardware types and materials for selection.

    Customized special hardware and sizes are welcomed.

    Technical service and consultation are supported.

    Advanced production equipment and production technology

    Competitive price (factory direct price) with professional service.

    Strict quality inspection for both materials and finished products.

    Focus on every details throughout service, production, packing and shipment.

    Extensive sales network with exporting to more than 30 countries.


    Parameters 

    MaterialStainless Steel
    SizeM4-M12
    ShapeSquare
    Thread TypeMachine
    OEMAvailable


    Application

    Commonly used in furniture as a blind nut they are also used in rail channels in order to prevent turning of rail when pressure is applied.They are assembled as a perfect foundation in metal channels for hidden fasteners.


    Features

    Because of the four-sided shape, square nuts and square headed bolts are very simple to tighten. Your tool simply grips two opposite sides to tighten and loosen these fasteners, as opposed to fitting snugly onto a hex shaped head.

    Using a simple grip or pinch on this nut may not provide adequate strength when working with an older or corroded fastener.But most often this simple method of installation and retraction proves to be a benefit.

    When measuring the position of nuts, the square shape also acts as a quick gauge. Railroad laborers found this especially beneficial, since a properly tightened square head bolt and square nut would sit parallel to railroad ties. If the nut or bolt head was at an angle, it needed to be tightened further. This quick visual gauge makes for simple inspections and reduces the risk of fastener failure on many different applications   

    Square nuts can be tightened with pliers or a wrench, making them ideal for use in blind locations. Laborers can tighten and loosen a square shaped fastener without having it in sight, as long as a sturdy grip can be obtained on two opposing sides of the nut or bolt head.

    For the same reasons stated above, the square nut and square head bolt are ideal for use in tight locations. Needle nosed pliers have an extended reach for working with tight or narrow confines, and the use of square shaped fasteners makes sense when this type of tool is used to tighten and loosen the joint. This principle works well in electronics, where tiny spaces are filled with small square head bolts and square nuts.


Similar Product Recommend