KM-PF-1 Automatic sediment Filter water purificationfor water treatment systems
Model number : KM-PF-1 :
KM-PF-1 Automatic sediment Filter water purificationfor water treatment systems
Water filter .Water purification . Pre filtration .
Water Treatment machine :
Products Applicat ions :
The KM-PF-1 is designed to be plumbed into a home's incoming water supply pipe , where it will reduce sand , grit, debris ,pipe scale and other loose particulate matter from the water and periodically flush them down the drain . It can be used as a pre-filter for the center water filter and softener .
The KM-PF-1 has an electronic control that counts down the days until the next automatic flush if collected sediment particles . the number of days is programmable .
Otherwise , the electronic controller can runs by a transformer or on a 6 volt battery . the controller will indicate when the battery need to be replaced . it will be very easy .
Products Characteristics :
| Model | KM-PF-1 ( Pre- Water Purification ) |
| Flow rate | 35 GPM |
| Working pressure | 0.1-0.6 Mpa |
| Inlet & Outlet | 1/2'', 3/4'', 1'' is avaliable |
| Water Capacity | Depend on the inlet water pressure |
| Working Temperature | 5-50 degrees Celsius |
| Size of filter mesh | 2-15 micron |
| Packing Size | 133×105×381 mm |
| Application | House, Villa, Office, Cafe, Restaurant, marketplace etc. |
- The Same applied products :
-

Company information :
Working shop:

Package and shipment :
News :
Certification :