Welcome Customer !

Membership

Shanghai Tongke Flow Technology Co., Ltd.
Free Member ·1YRS
ShangHai,ShangHai
Manufacturer

Main Products: Water pump

Xwboo>Products
Product Categories

Shanghai Tongke Flow Technology Co., Ltd.Free·1YRS

  • E-mail

    seth@tkflow.com

  • Phone

    86-21-59035698

  • Address

    11, Shenjiabang Road, Qingpu District, Shanghai, China

Contact Now

CZ Horizontal Single Stage End Suction Centrifugal ISO Chemical Pumps

Model
Nature of the Manufacturer
Manufacturer
Product Category
Place of Origin
City, Province
Overview
Short Description: series: CZCZ series standard chemical pumps are horizontal, single stage, end suction type centrifugal pumps, in accordance with standards of DIN24256, ISO2858, GB5662, they are basic products of standard chemical pump, transferring liquids like low or high temperature, neutral or corrosive, clean or with solid, toxic and inflammable etc.
Product Details

Product Description

CZ series standard chemical pumps are horizontal, single stage, end suction type centrifugal pumps, in accordance with standards of DIN24256, ISO2858, GB5662, they are basic products of standard chemical pump, transferring liquids like low or high temperature, neutral or corrosive, clean or with solid, toxic and inflammable etc.

Product advantage

CASING √

Foot support structure

IMPELLER √

Close impeller. Thrust force of CZ series pumps are balanced by back vanes or balance holes, rest by bearings.

COVER √

Along with seal gland to make sealing housing, standard housing should be equipped with various kinds of seal types.

SHAFT SEAL √

According to different purpose, seal can be mechanical seal and packing seal. Flush can be inner-flush, self-flush, flush from outside etc, to ensure good work condition and improve life time.

SHAFT √

With shaft sleeve, prevent shaft from corrosion by liquid, to improve life time. Back pull-out design Back pull-out design and extended coupler, without taking apart discharge pipes even motor, the whole rotor can be pulled out, including impeller, bearings and shaft seals, easy maintenance.

Running Data

Diameter: 32~300 mm

Capacity: ~2000 m /h

Head: ~160 m

Working pressure: ~2 .5 MPa

Working temperature: -80 ~+150℃



  • Data range

    Diameter: 32~300 mm

    Capacity: ~2000 m /h

    Head: ~160 m

    Working pressure: ~2 .5 MPa

    Working temperature: -80 ~+150℃

    Structure drawing

    Characteristics of structure

    CASING : Foot support structure

    IMPELLER: Close impeller. Thrust force of CZ series pumps are balanced by back vanes or balance holes, rest by bearings.

    COVER : Along with seal gland to make sealing housing, standard housing should be equipped with various kinds of seal types.

    SHAFT SEAL :According to different purpose, seal can be mechanical seal and packing seal. Flush can be inner-flush, self-flush, flush from outside etc, to ensure good work condition and improve life time.

    SHAFT:With shaft sleeve, prevent shaft from corrosion by liquid, to improve life time. Back pull-out design Back pull-out design and extended coupler, without taking apart discharge pipes even motor, the whole rotor can be pulled out, including impeller, bearings and shaft seals, easy maintenance.