Product Description
GDL non-self suction vertical multi-stage centrifugal pumps mounted with a standard motor, the motor shaft is linked, via the motor seat, directly with the pump shaft with a clutch, both pressure-proof barrel and flow-passing components are fixed in between the motor seat and the water in-out section with pull-bar bolts and both water inlet and outlet of the pump are positioned on one line of the pump bottom; and the pumps can be fitted with an intelligent protector, in case of necessity, to effectively protect them against dry movement, lack-of-phase, overload etc.
Product advantage
Compact structure
Light weight
High Efficiency
Good Quality for Long time life
Running Condition
Thin, clean, non-combustible non-explosive liquids containing no solid grains or fibers.
Liquid temperature: constant-temperature type -15~+70℃,hot-water type +70~120℃.
Ambient temperature: max. +40℃.
Elevation: max. 1000m
Note: please note it at the model selection in case the elevation is over 1000m.
Data range
| Capacity | 0.8-150 m3/h |
| Head | 6-400 m |
| Liquid Temperature | -20-120 ºC |
| Operation pressure | ≤ 40bar |
Structural Diagram
Attention: More detailed technical data for Vertical Multistage Centrifugal High Pressure Water Pump please contact Tongke.
Main parts List
| Part | Material |
| Shaft seal form | Packing gland or Mechanical seal |
| Impeller | Cast iron, Ductile iron, Carbon steel , Stainless steel, Bronze, Duplex SS |
| Bearing | Qualified China Bearing or NTN/NSK/SKF |
| Shaft | 2Cr13, 3Cr13, Duplex SS |
Attention: Particular material for project please contact Tongke engineer for suggestions.