10k Film Type NTC Thermistor

Brief Instruction：

MF5A-6 10k film type ntc thermistor, the film width of the other size is 4.5mm, the total length is 50mm, and the total thickness of the product is Max 0.6mm. The resistance parameters of this size are as follows10KΩ3435K,10KΩ3977K。

Features：

1. MF5A-6 Series of products for the same direction lead film packaging type

2. Insulation film packaging, fast thermal sensing speed, high sensitivity

3. Good stability, high reliability

4. Good insulation

5. High resistance value precision

6. Small size, light weight, strong structure, easy to automate installation

7. Operating temperature range: -40℃~100℃

8. The width of the membrane is 4.5mm and the length is 50mm

9. Alternative resistance values are available for precision:±1%，±2%，±3%，±5%

Precautions for Use

1. Do not bend the resistance wire frame at will so as not to cause chip and wire frame to fall off and cause bad resistance

2. welding temperature should not exceed 300℃, welding time should not exceed 0.5 seconds

3. Heat gun is used when heat shrink tubing, and the temperature of the air gun should be controlled at about 120℃

4. When welding, the use of constant temperature iron, flat iron head, holding resistance in one hand, the other hａnd with wire for touch welding, can improve the production efficiency and shorten the welding time

5. Special tip: Do not touch the chip by hand

Application：

Home appliances, computer, printer, battery pack

Part Number Code：

Structure and Dimensions：

Electrical specification：

Product pictures/images：