Specification Material (1) Tempered glass: its function is to protect the main body of power generation (cell), and the requirements for light transmission selection: 1. The transmittance must be high (generally more than 91%); 2. Ultra-white tempering treatment (2) EVA: The purpose is to bond...
Product Details
Specification
Model
FS 330W
Maximum Power at STC (Pmax)
330W
Optimum Operating Voltage (Vmp)
37.2V
Optimum Operating Current (Imp)
8.87A
Open-Circuit Voltage (Voc)
46.2V
Short-Circuit Current (Isc)
9.24A
Solar Module Efficiency (%)
17.01
Operating Temperature
-40 to 85℃
Maximum System Voltage
DC1000
Maximum Series Fuse Rating
15A
Power Tolerance
+/-3%
Material
(1) Tempered glass: its function is to protect the main body of power generation (cell), and the requirements for light transmission selection:
1. The transmittance must be high (generally more than 91%);
2. Ultra-white tempering treatment
(2) EVA: The purpose is to bond and fix the tempered glass and the main body of power generation (such as batteries). The quality of the transparent EVA material directly affects the life of the module. light transmittance, thereby affecting the power generation quality of the module. In addition to the quality of EVA itself, the lamination process of component manufacturers is also very influential. For example, the adhesiveness of EVA is not up to standard, and the bonding strength of EVA to tempered glass and backplane is not enough, which will cause EVA to age prematurely and affect the life of components.
(3) Cells: The main function is to generate electricity. The mainstream in the power generation market is crystalline silicon solar cells and thin-film solar cells. Both have their own advantages and disadvantages. Crystal silicon solar cells, the equipment cost is relatively low, but the consumption and The cost of the cell is very high, and the photoelectric conversion efficiency is also high. It is more suitable for thin-film solar cells to generate electricity in the outdoor sunlight. The relative equipment cost is high, but the consumption and battery cost are very low, and the photoelectric conversion efficiency is more than half that of the crystalline silicon cell. But the low-light effect is very good, and it can also generate electricity under ordinary light, such as the solar cells on the calculator.
(4) Backplane: The function is to seal, insulate and waterproof. Generally, TPT, TPE and other materials must be resistant to aging. Most component manufacturers have a 25-year warranty. Tempered glass and aluminum alloys are generally no problem. The key is whether the backplane and silicone can meet the requirements.
(5) Aluminum alloy: protect the laminate and play a certain role in sealing and supporting.
(6) Junction box: Its function is to protect the entire power generation system and act as a current transfer station. If the component is short-circuited, the junction box will automatically disconnect the short-circuit battery string to prevent the entire system from being burned. The most important thing in the junction box is the selection of diodes. Depending on the type of cells in the module, the corresponding diodes are also different.
(7) Silica gel: sealing function, used to seal the junction of components and aluminum alloy frames, components and junction boxes. Some companies use double-sided tape and foam to replace silica gel. And the cost is low.