Welcome Customer !

Membership

Flagsun (Suzhou) New Energy Co.,Ltd
Free Member ·1YRS
SuZhou,JiangSu
Manufacturer

Main Products: Solar Panel (Component)

Xwboo>Products

Flagsun (Suzhou) New Energy Co.,LtdFree·1YRS

  • E-mail

    info@flagsun.com

  • Phone

    86-512-53724676

  • Address

    No. 119 Yanshan West Road, Chengxiang Town, Taicang China, Suzhou, Jiangsu, China

Contact Now

Bipv Solar Panels Transparent

Model
Nature of the Manufacturer
Manufacturer
Product Category
Solar Panel
Place of Origin
City, Province
Overview
340w-360w BIPV solar panels Building Integrated Photovoltaic (BIPVBuilding Integrated Photovoltaic), that is, laying solar photovoltaic panels outside the building. It is an important form of developing and applying solar power generation. The basic principle and characteristics of BIPV A...
Product Details

340w-360w BIPV solar panels

Rated Maximum Power at STC340W345W350W 355W 360W
Maximum Power Voltage (Vmp)37.1V 37.5V 37.8V38.7V 38.4V
Maximum Power Current (Imp)9.26A9.28A 9.29A9.17A9.39A
Open Circuit Voltage ( Voc)47.0V47.2V 47.3V 47V 48.3V
Short Circuit Current (Isc)9.81A9.82A 9.82A9.69A 9.84A
Module Efficiency17.04%17.29% 17.54% 18.3%18.37%
Power Tolerance 0~+3%0~+3%0~+3% 0~+3%0~+3%
STC: Irradiance 1000W/m², Module Temperature 25°c, Air Mass 1.5
Mechanical Parameters
Cell TypeMono-crystalline 156x156mm (6inch)
No. of Cells72 (6x12)
Dimension 1956x990x40/45/50mm
Glass3.2mm, High Transmission, Low Iron, Tempered Glass
Junction BoxIP65&IP67 Rated
Output CableSection Size: 4mm² , Length: 900mm
Frame Anodized Aluminum Alloy
No. of Bypass Diodes3&6
Connector MC4 Compatible
Working Conditions
Maximum System Voltage

DC 1000V(IEC) / 1500V(IEC) / 600V(UL)

Operating Temperature -40°c~+85°c
Maximum Series Fuse15A
NOCT45±2°c
Application ClassClass A
Temperature Coefficient
Temperature Coefficient of Pmax-0.40%/°c
Temperature Coefficient of Voc -0.30%/°c
Temperature Coefficient of Isc +0.05%/°c

Building Integrated Photovoltaic (BIPVBuilding Integrated Photovoltaic), that is, laying solar photovoltaic panels outside the building.

It is an important form of developing and applying solar power generation.

The basic principle and characteristics of BIPV

A typical photovoltaic building integrated system is shown in Figure 1. The system is a household rooftop photovoltaic system, and the solar photovoltaic array is laid on the roof.

The generated DC power is boosted by the primary DC-DC converter and tracked at the maximum power point, and then converted into the same frequency and phase with the grid through the inverter device.

The AC power is connected to the grid, and most of the power generated by it is consumed by the electrical equipment loaded in the building, and the excess power is injected into the power grid, while the photovoltaic power generation output

In lesser cases, the loads in the building can draw power from the grid.

Advantages

(1) The use of photovoltaic power generation can reduce the emission of carbon dioxide and sulfur dioxide, and help to build a low-carbon, energy-saving and environmentally friendly power supply system;

(2) The photovoltaic modules are on the surface of the building and do not occupy the ground space, which is especially important for urban buildings with dense population and expensive land resources

(3) Due to the high integration of light-needle cells and building materials, the construction and installation costs are reduced, which not only reduces the overall cost of the building, but also increases the artistic charm of the building;

(4) Building-integrated photovoltaics (BIPV) mainly supply power for near-end loads (in most cases, the electrical equipment inside the building), which reduces the load's dependence on the power grid, reduces the transmission loss on the power supply line, and increases the reliability of power supply. ;

(5) Photovoltaic power generation produces more power in summer and during the day. For photovoltaic systems in factories and office buildings, this feature can be used to reduce peak power demand;

(6) The photovoltaic cells on the building surface absorb solar energy and convert it into electrical energy, which reduces the heat gain of the wall or roof, helps to reduce the thermal load of the building's indoor air-conditioning unit, and plays a role in heat insulation;

(7) The photovoltaic power generation system has both a DC part and an AC part, which is beneficial to directly connect to the emerging DC microgrid in combination with the DC conversion technology, and directly supply power to the DC load, thereby reducing the conversion link and improving the efficiency.