Structure
The body of the camshaft is a cylindrical rod the same length as the cylinder bank. There are several cams on it, which are used to drive the valves. One end of the camshaft is the bearing support point, and the other end is connected to the drive wheel.
The sides of the cam are egg-shaped. The purpose of its design is to ensure sufficient intake and exhaust of the cylinder, specifically to complete the opening and closing of the valve in the shortest possible time. In addition, considering the durability of the engine and the smoothness of operation, the valve should not have too much impact due to the acceleration and deceleration process during the opening and closing actions, otherwise it will cause serious valve wear, increased noise or other serious consequences. Therefore, there is a direct relationship between the cam and the engine's power, torque output, and smoothness of operation.
Generally speaking, in an in-line engine, one cam corresponds to one valve, and a V-type engine or a horizontally opposed engine shares a cam for every two valves. The rotary engine and the valveless engine do not need a cam due to their special structure.