Welcome Customer !

Membership

Chengdu Raptors Mechanical & Electrical Equipment Co., Ltd.
Free Member ·1YRS
ChengDou,SiChuan
Manufacturer

Main Products: Other Engine Systems|Engine|Filter|Cylinders & Components

Xwboo>Products
Product Categories

Chengdu Raptors Mechanical & Electrical Equipment Co., Ltd.Free·1YRS

  • E-mail

    export@chinaraptors.com

  • Phone

    862883979536

  • Address

    No. 789, Baiyun Road, East of Xindu Industry, Chengdu, Sichuan, China

Contact Now

Lube Filter P502364 For Donaldson Brand

Model
Nature of the Manufacturer
Manufacturer
Product Category
Place of Origin
City, Province
Overview
Short Description: Part number: P502364Description: Original Donaldson lube filter spin-on combination P502364
Product Details

Product Description

Method of replacing filter element:
1, Replace the filter element of the single-barrel pre-filtration device: a. Close the inlet ball valve and open the upper end cover. (Aluminum alloy upper end cover should be gently pried open from the side gap with a flat screwdriver); B. Unscrew the drain plug to drain the dirty oil; C loosen the fastening nut on the upper end of the filter element, and the operator holds the filter element tightly with oil-proof gloves and removes the old filter element vertically upward; D. Replace the new filter element, pad the upper sealing ring (the lower end has its own sealing gasket), tighten the nut; F. Tighten the drain plug, cover the upper cover (attach the sealing ring), and tighten the bolts
2, Replace the filter element of the two-barrel parallel pre-filtration device: a. Close the oil inlet valve of the filter element that needs to be replaced, close the oil outlet valve after a few minutes, and then unscrew the bolt of the end cover to open the end cover; B. Open the drain valve and thoroughly drain the dirty oil to prevent the dirty oil from entering the clean oil chamber when replacing the filter element; C. Loosen the fastening nut on the upper end of the filter element, and the operator holds the filter element tightly with oil-proof gloves and takes off the old filter element vertically upward; C. Replace the new filter element, pad the upper sealing ring (the lower end has its own sealing gasket), tighten the nut; D. Close the drain valve, cover the upper cover (pay attention to sealing ring), and tighten the bolts. E. First open the oil inlet valve, then open the exhaust valve, close the exhaust valve immediately when the exhaust valve leaves the oil, and then open the oil outlet valve; Do the same for the other filter.

Filter replacement part number

Manufacturer Name:Manufacturer Part # :
Fleetguard:LF16110
FIAT KOBELCO:YN30T01001P1
HINO:15209Z500D
ISUZU:156072190
KOBELCO:156072190
NEW HOLLAND:
NISSAN/UD TRUCKS:15209Z5001
TOYOTA:S156071290
VIC:C605

Product Attributes

Outer Diameter:120 mm (4.72 inch)
Thread Size:1 1/2-16 UN
Length:210 mm (8.27 inch)
Gasket OD:116.5 mm (4.59 inch)
Gasket ID:100 mm (3.94 inch)
Efficiency 50%21 micron
Efficiency 95%40 micron
Efficiency 99%48 micron
Efficiency Test StdJIS D 1611
Media Type:Cellulose
Collapse Burst:6.9 bar (100 psi)
Type:Combination
Style:Spin-On
Primary Application:HINO 156072190
Warranty:3 months
Stock situation:150 pieces in stock
Condition:Genuine and new

Packaged Dimensions

Packaged Length:0.13 M
Packaged Width:0.13 M
Packaged Height:0.23 M
Packaged Weight:1.7 KG
Packaged Volume:0.003887 M3

Other Information

Country of Origin:Indonesia
HTS Code:8421230000
UPC Code:

Application

This filter used in Hino J08EVC, 8.9L A09C, J08C, J08E-TE, A09C, J05E, J05E-TA engine for Hino 500 series truck, Hino Ranger truck, Kobelco SK200-8, SK260-8, SK330-8 excavator tracked equipment.

Product Pictures

P502364 lube oil filter 1
P502364 lube oil filter 2
P502364 lube oil filter 4
P502364 lube oil filter 3

  • Previous: Fuel Filter Water Separator P501108/ FS20131 For Donaldson And Fleetguard Brand
  • Next: Fuel Filter P502466 For Donaldson Brand