1.Direct injection combustion chamber, easy to start, low oil consumption and economical to use.2.Easy to install and layout, light weight and compact structure.3.Strong power , low vibration , low steady state speed governing rate.4.Spare parts have good versatility.5.Power interface conforms to the SAE standard, good market interchangeability and versatility.6.Optional electronic governor, which make the engine speed more stable and steady state speed governing rate can be guaranteed within 1%.7.Optional in......
1.Direct injection combustion chamber, easy to start, low oil consumption and economical to use.
2.Easy to install and layout, light weight and compact structure.
3.Strong power , low vibration , low steady state speed governing rate.
4.Spare parts have good versatility.
5.Power interface conforms to the SAE standard, good market interchangeability and versatility.
6.Optional electronic governor, which make the engine speed more stable and steady state speed governing rate can be guaranteed within 1%.
7.Optional installation of radiator ,air filter ,silencer and other components.
1.Direct injection combustion chamber, easy to start, low oil consumption and economical to use.
2.Easy to install and layout, light weight and compact structure.
3.Strong power , low vibration , low steady state speed governing rate.
4.Spare parts have good versatility.
5.Power interface conforms to the SAE standard, good market interchangeability and versatility.
6.Optional electronic governor, which make the engine speed more stable and steady state speed governing rate can be guaranteed within 1%.
7.Optional installation of radiator ,air filter ,silencer and other components.
| |
| |
| |
| | |
| | |
| | |
REATED POWER FOR GENERATOR SETS(KVA) | | |
STANDBY POWER FOR GENERATOR SETS(KVA) | | |
REATED POWER FOR GENERATORSETS(KW) | | |
STANDBY POWER FOR GENERATOR SETS(KW) | | |
STEADY STATE SPEED GOVERNINGRATE % | |
MAX SPEED ON NO LOAD(R/MIN) | |
MIN SPEED ON NO LOAD(R/MIN) | |
SPECIFIC FUEL CONSUMPTION RATE ATMAX. SPEED (G/KW·H) | |
| |
| 627×545×610 (WITHOUT AIR FILTER AND RADIATOR ) |
ROTATION (VIEWED FROM FLYWHEEL) | |
| |
| |
NUMBER OF TEETH OF THE FLYWHEEL | |
|
| |
| ONE INLET AND ONE EXHAUST VALVE |
| | |
| |
|
| |
| | |
| | |
| | |
| | |
| | |
|
| |
| |
| |
| |
| |
| |
| |
|
| FORCED LUBRICATION AND SPLASHLUBRICATION |
| |
| |
MAX ALLOWABLE OIL TEMPEARTURE | |
| | |
| |
|
|
| |
| 80L/MIN(3000RPM WATER PUMP FLOWHEIGHT 5M) |
| |
| |
| |
OPENING TEMPERATURE /FULL OPENTEMPERATURE OF THERMOTAT | |
| |
|
| |
| BUILT-IN VOLTAGE STABILIZER |
| |
| |
| |
COLD START AUXILIARY DEVICE | |
INTAKE AND EXHAUST SYSTEM |
| |
| |
MAX PERMISSIBLE RESTRICTIONS OFEXHAUST SYSTEM KPA | |
| |
DISTANCE BETWEEN THE MOUNTING SURFACE OF THE SPEED SENSOR ANDTHE TOP OF THE FLYWHEEL GEAR RING | |