TaiAn，ShanDong-
E-mail
fred@demeithermo.com
- Phone
-
Address
A8,No.98 Nianhua South Street ,Shengzhu271000
Product Categories
- Humidity Generator and Dry Air Supply Unit
- Ultrasonic Flaw Detector Verification Device
- DY-GJC2 Steel Tape Measuring Device
- Surface Thermometer Calibration Device
- Pressure Calibration Equipment
- Standard Thermal Resistance, Thermocouple, Mercury Thermometers
- Thermocouple Testing Furnace, Thermocouple Annealing Furnace
- Blackbody Furnace for Temperature Gun
- Dew Point Meter/Ventilated Dry and Wet Meter
- High Temperature Blackbody Furnace
- Low Temperature Blackbody Furnace
- Transformer Oil Level Thermometer Detection Device
- High Temperature Dry Block Temperature Calibrator
- Fast Heating and Cooling Dry Block Temperature Calibrator
- Medium Temperature Dry Block Temperature Calibrator
- Temperature and Humidity Test Chamber
- Non-point Source Blackbody Furnace
- Medium Temperature Blackbody Furnace
- Temperature Water Bath, Oil Bath, Refrigeration Bath
- Low Temperature Dry Block Temperature Calibrator
Taian Demei Electromechanical Equipment Co., Ltd.Free·1YRS
DY-HT1D Ultra-low Temperature Blackbody Furnace(-100℃~80℃)
NegotiableUpdate on September 02
- Model
- Nature of the Manufacturer
- Manufacturer
- Product Category
- Low Temperature Blackbody Furnace
- Place of Origin
- City, Province
Overview
The blackbody fuenace is not only suitable for the use of radiation thermometers in the laboratory calibration of measuring institutions at all levels, but also for on-site calibration.
Product Details
Product Introduction
In the calibration and verification of radiation thermometers, the comparative method is usually adopted, that is, through the radiation source of high stability (usually black body radiation source) and other supporting equipment, the temperature reproduced by the standard apparatus and the temperature reproduced by the radiation thermometer are compared, in order to judge whether it is qualified or to give the calibration results.
As a standard radiation source, the standard black body is mainly used to calibrate radiation thermometers, infrared thermometers and radiation temperature sensing detectors.
At present, our company has advanced black body technology, full product range and wide temperature range of black body series products.
Product Feature
1. Human-machine interface, Chinese display, touch operation, beautiful and generous.
2. One-key temperature setting, easy to operate.
3.Rapid heating, temperature control.
4. Novel appearance design, the use of furnace body and temperature control instrument separated structure.
5. Isothermal black body cavity, only one cavity mouth, cavity mouth radiation evenly distributed along with the spectrum, cavity mouth emissivity above 0.995, the resolution of 0.1.
6. Heat insulation between the heating body and the shell, special software is used for pressure limiting heating, no high-power power transformer is required.
7. Automatic temperature control is adopted, which is safe and reliable with fast temperature rise and good temperature stability.
8. Easy to operate, small in size and light in weight, easy to carry, suitable not only for laboratory calibration, but also for on-site calibration.
Technical Indicators
Operating temperature: -100℃~80℃
Operation mode: touch screen operation
Temperature resolution: 0.1℃
Temperature control: PID automatic control
Mouth cavity diameter: Φ 50 mm
Cavity and mouth emissivity: ≥0.995
Temperature stability: t is the radiation source temperature if the temperature is not greater than 0.1℃ and 0.1% T
Temperature uniformity: not greater than ± (0.15℃ and 0.15% T, t is the radiation source temperature)
Power supply: 220 vac50hz
Power: 1600 w
Size: 610*280*410mm(length x width x height)
Weight: 20 kg
Note: other special requirements can be customized according to the needs of users
Operating Interface
Similar Product Recommend