TaiAn，ShanDong-
E-mail
fred@demeithermo.com
- Phone
-
Address
A8,No.98 Nianhua South Street ,Shengzhu271000
Product Categories
- Humidity Generator and Dry Air Supply Unit
- Ultrasonic Flaw Detector Verification Device
- DY-GJC2 Steel Tape Measuring Device
- Surface Thermometer Calibration Device
- Pressure Calibration Equipment
- Standard Thermal Resistance, Thermocouple, Mercury Thermometers
- Thermocouple Testing Furnace, Thermocouple Annealing Furnace
- Blackbody Furnace for Temperature Gun
- Dew Point Meter/Ventilated Dry and Wet Meter
- High Temperature Blackbody Furnace
- Low Temperature Blackbody Furnace
- Transformer Oil Level Thermometer Detection Device
- High Temperature Dry Block Temperature Calibrator
- Fast Heating and Cooling Dry Block Temperature Calibrator
- Medium Temperature Dry Block Temperature Calibrator
- Temperature and Humidity Test Chamber
- Non-point Source Blackbody Furnace
- Medium Temperature Blackbody Furnace
- Temperature Water Bath, Oil Bath, Refrigeration Bath
- Low Temperature Dry Block Temperature Calibrator
Taian Demei Electromechanical Equipment Co., Ltd.Free·1YRS
DY-JDL600 Thermocouple Testing Furnace
NegotiableUpdate on September 02
- Model
- Nature of the Manufacturer
- Manufacturer
- Product Category
- Thermocouple Testing Furnace, Thermocouple Annealing Furnace
- Place of Origin
- City, Province
Overview
DY-JDL600 thermocouple verification furnace is an electric heating equipment which provides heat source for thermocouple. It is mainly composed of furnace heating element and insulation shell, etc. The verification furnace can be divided into vertical furnace and horizontal furnace, which can be divided into short type furnace and long type furnace according to its appearance.
Product Details
Product Introduction
DY-JDL600 thermocouple verification furnace is an electric heating equipment which provides heat source for thermocouple. It is mainly composed of furnace heating element and insulation shell, etc. The verification furnace can be divided into vertical furnace and horizontal furnace, which can be divided into short type furnace and long type furnace according to its appearance.
This verification furnace is used for (300℃-1200℃) range including horizontal tube thermocouple verification furnace with temperature controller and no temperature controller, temperature field provision.
Used for calibrating thermocouple resistance, which is divided into noble metal thermocouple calibrating furnace, thin metal thermocouple calibrating furnace, short type thermocouple calibrating furnace.
Executive verification regulation
JJF1637-2017 "Tap Metal Thermocouple Calibration Specifications"
JJG351-1996 "Verification Regulation of Metal Thermocouple for Work Use"
Verification regulation of standard platinum rhodium 10-platinum thermocouple JJG75-95
JJG141-2000 "Verification Regulation of Thermocouple of Working Precious Metals"
Product Feature
| Model | DY-JDL600 |
| Temperature Range | 300-1200℃ |
| Heat source | Electric heating |
| Uniform temperature field | Within 30mm of the effective working area, the absolute value of the temperature difference between any two points is not more than 0.5 °C; the radial radius is not less than 14mm, the absolute value of the temperature difference between any two points of the same section is not more than 0.25 °C |
| Length | 600mm |
| Hole Diameter | 40mm |
| Size | 625mm×300mm×360mm |
| Power | 1000w |
| Power Supply | 220V 50HZ |
Similar Product Recommend