Rod End for Hydraulic Components

The rod ends is a spherical sliding bearing. The basic type is composed of inner and outer rings with spherical sliding spherical contact surface. The plain bearing is mainly composed of an inner ring with an outer spherical surface and an outer ring with an inner spherical surface, which can bear a large load. According to its different types and structures, it can bear radial load, axial load or combined load. Because the outer sphere of the inner ring is inlaid with composite material, the bearing can produce self lubrication in operation. It is generally used for swing motion with low speed and tilting motion within a certain angle range. When the supporting shaft is not concentric with the shaft shell hole, it can still work normally. Self lubricating joint auxiliary bearing is used in water conservancy, professional machinery and other industries. Because of the large sliding surface of the bearing, such as zinc plating, chrome plating and so on. Therefore, it has large load capacity and impact resistance, and has the characteristics of corrosion resistance, wear resistance, self-aligning, good lubrication or self-lubricating without pollution of lubricating dirt. Even if the installation is misplaced, it can work normally. Therefore, plain bearings are widely used in low speed swing motion, tilt motion and rotation motion.

Characteristic of rod ends

Custom size requirement are also available

Features

BALL

● 52100 Bearing Steel

● Heat Treated

● Hard Chrome Plated

● Precision Ground

RACE

● Nylon/PTFE

● Self-Lubricating

● Self-Sealing

BODY

● Chromoly Steel

● Heat Treated

● Protective Coated for Corrosion Resistance

EXCLUSIVE FEATURES

● Metal to Metal Support for Heavy Shock Loads

● Increased Cross-Sectional Thickness for Greater Tensile Strength

Applications

● Industrial Robotic arm, Reducer drive

● Precision Turntable, CNC rotary table

● Rotation part of Machine tools

● Inspection instrument, Medical equipment

● Aviation equipment, Military radar etc