The MBORST Series PP Pleated Filter Cartridge delivers high efficiency and consistent filtration of fluids in a wide range of critical applications. They are constructed of pleated melt blown filter media that provides removal of particles from 0.1 to 50um. The high surface area ensures long service life and low initial pressure drops. All cartridge hardware components are high purity polypropylene materials for use in critical process applications. These cartridges are manufactured and assembled in a clean room en......
MBORST Series-PP Pleated Filter Cartridge
The MBORST Series PP Pleated Filter Cartridge delivers high efficiency and consistent filtration of fluids in a wide range of critical applications. They are constructed of pleated melt blown filter media that provides removal of particles from 0.1 to 50um. The high surface area ensures long service life and low initial pressure drops. All cartridge hardware components are high purity polypropylene materials for use in critical process applications. These cartridges are manufactured and assembled in a clean room environment to minimize the possibility of contamination. MBORST Series filter cartridges are available in a wide range of configurations to fit most commercially available filter housings.
Applications
·Pharmaceutics ·Food and beverage
·Oil & Gas ·Microelectronics
·Chemical industry ·Prefiltration for RO
·Paints & Coatings ·Cosmetics
·Photographic solutions ·Plating solutions
Features
Excellent chemical compatibility. Suitable for filtering organic solvents,acid bases
Pleated design increased the filtration area
low pressure drop, long service life
Full range of removal ratings
Graded pore density for high dirt holding capacity
FDA compliance material
Specifications
Dimensions:
Outside diameter: 2.7” (69mm) Length: 9.75",10", 20", 30", 40"
Material of Constructions
Filter media: PP
Support/Drainage: PP
Cage/Core/End cap: PP
Seal Material : Silicone, EPDM, NBR, Viton, Teflon, E-FKM
Performance
Removal Rating: 0.1µm, 0.22µm, 0.45µm, 1µm, 3µm, 5µm, 10µm, 20µm, 50µm
Maximum operating temperature: 80°C @1Bar, support adaptors are recommended for temperature exceeds 50°C
Maximum operating differential pressure: 4.0Bar ,normal temperature
Maximum operating differential pressure (reverse direction): 2.0Bar normal temperature
Sterilization temperature time: 5times, 20 minutes cycles at 120°C