The MBORST Series-PTFE Pleated Filter Cartridge is constructed of imported natural hydrophobic Polytetrafluoroethylene membrane media and non-woven support materials. The adaptors are thermally welded without the use of glues or adhesives to prevent any possibility of pollution.
MBORST Series-PTFE Pleated Filter Cartridge
The MBORST Series-PTFE Pleated Filter Cartridge is constructed of imported natural hydrophobic Polytetrafluoroethylene membrane media and non-woven support materials. The adaptors are thermally welded without the use of glues or adhesives to prevent any possibility of pollution.
Applications
Fermentation tank
Vent filter of hold tank
Electronic industry
Chemical industry
Semiconductor: ultrapure gas filtration
Features
Excellent performance of high temperature-resistance, repeat steam ability in situation.
Hydrophobic membrane with high flow.
Low pressure drop, high flow rate, long service life
99% integrity tested
Non fiber-releasing
FDA compliance material
Specifications
Dimensions:
Outside diameter: 2.7” (69mm)
Length: 9.75",10", 20", 30", 40"
Material of Constructions:
Filter media: PTFE
Support/Drainage: PP
Cage/Core/End cap: PP
Seal Material : Silicone, EPDM,NBR, Viton, Teflon, E-FKM
Performance
Removal rating:For Gas:0.01um,0.02um
For Liquid:0.1um,0.22um,0.45um
Maximum operating temperature: 80°C
Maximum operating pressure:4.2Bar @25℃
Maximum operating pressure (Reverse Direction): 2.1Bar @ 25°C
Maximum temperature sterilization:20times, 30minutes cycles at 121°C
When filter the air,pressure is 2bar,start pressure 100Mbar,10”filter can flow 300Nm³/h