AC Output Reactor

General:

The AC output reactor is connected between the output side of the Variable-frequency Drive (VFD) and the electric machinery. It is used to decrease the influence of long line distributed capacitance, suppress the output harmonic of VDF, reduce the noise, reduce the Du / dt value of motor terminal, reduce the peak value of load current, increase the effective transmission distance, avoid premature aging of electric machinery's insulation part, and prolong the service life of VDF and electric machinery.

Applications：

Industrial Automation, Renewable Energy, Rapid Transit, Smart Grid, etc.

Features:

●Vacuum Pressure impregnation (V.P.I) is used to enhance insulation property;

●Silicon steel of high permeability is exploited to reduce the magnetic core loss and noise;

●Strong overload capacity, high compressive strength;

●Superior protection against humidity, can operate in high humidity environment;

●Low temperature rise; can operate at high ambient temperature.

●Standards: GB10229-1988, JB9644-1999, IEC289:1987

●Type: LSDZ02

●Rated Voltage: AC380V/50Hz   AC660V/50Hz

●Rated Current: 5A～1600A@40℃

●Dielectric Strength: Winding-core 3000VAC/50Hz/5mA/10s/no arcing and no breakdown

●Insulation Resistance: 1000VDC The insulated resistance value ≥100MΩ

●Insulation Class: Above class F

●Noise Level: 65dB(tested at 1m from the horizontal distance point of inductors)

●Degree Of Protection: IP00