Three-phase Isolation Transformer
General :
The three-phase isolation transformer is used for power isolation and play the roles of protection, anti-thunder, wave filtering, etc. The purpose is to provide electrical isolation between load and power side; to prevent insulation damage to connected equipment caused by electric shock in IT distribution system, and to provide neutral point connection to form isolation or grounding.
Applications:
Industrial Automation, Medical Device, Renewable Energy, Rapid Transit, Smart Grid, etc.
Features:
●Coil treated by high-insulation craft, small partial discharge, high dielectric strength;
●Vacuum Pressure impregnation (V.P.I) is exploited, low noise, and, compressive strength;
●Silicon steel of high permeability is exploited to reduce the magnetic core loss and lower the temperature rise;
●PE by special treatment, Anti-thunder, strong tamper-resistance;
●Small and light, convenient installation, and maintenance.
Technical Specifications:
●Standards:GB、IEC
●Type:SG
●Rated Capacity: 1kVA~1000kVA
●Rated Frequency: 50/60Hz
●Rated Voltage: 220/380V/660V/1140V/3300V
●Transformer Connection Sections: Yyn,Yd11,Dyn11
●Short Circuit Impedance: 2%~6%
●Insulation Class: F/H
●Cooling Method: Forced Air cooling/ Natural cooling
●Degree Of Protection: customized based on customers’ requirement
●Operating Mode: Continuous Duty